Bus coupler - IBS IL 24 BK-LK/45 - 2860358

INTERBUS bus coupler, with fiber optic connection with a 45 degree angle, 24 V DC, without accessories



Technical data




Product Description

45° angled FO connection. The angled design means that the bus coupler and Inline station can also be mounted in low-profile 80-type terminal boxes. It also enables the correct installation of fiber optics in these boxes (despite the minimum bending radii required).
The Inline bus terminals connect the terminals of an Inline station to the INTERBUS network.
A fiber optic connection is used for connection to the INTERBUS remote bus. The remote bus cable is connected to the bus terminal via an F-SMA connector.
The bus terminal performs the following functions within an Inline station:
- Updates the INTERBUS remote bus signals
- Disconnects the outgoing remote bus or the connected I/O modules via software commands
- Connects to functional earth ground by snapping onto the DIN rail
The Inline terminals can be marked using hinged marking fields
The fields have insert cards that can be marked individually according to the application
In addition, the ZBFM-6... zack marker strip can be used to mark the terminal points
Note the following during configuration:
The total logic current of all the terminals connected to an Inline bus terminal must not exceed the maximum permissible total current of 2 A
Depending on the station configuration, the number of terminals that can be connected may be less than 63

Key Commercial Data

Orderkey 2860358
Packing unit 1
Catalog page Page 41 (AX-2007)
GTIN 4017918822842
Custom tariff number 85389091


586 Fulling Mill Road
Middletown, PA 17057
(800) 888-7388

  • Create PDF
  • Send by Email
  • Feedback