Component terminal block - UDK 4-DUR 499 - 2775250

1-level terminal block with double connection on both sides, with fitted resistor 499 Ω, ± 0.1%, 0.5 W, TCR ± 10 ppm/K, cross section: 0.2 - 2.5 mm², width: 6.2 mm, color: Gray



Technical data





Your advantages

  • The four-conductor connection enables user-friendly wiring
  • The constant circuits common in process automation transmit the measured values as a load-independent current of 0 - 20 mA
  • The lower level is assigned to the measuring line while the upper level is used for voltage pick-off via the 499 ohm resistor
  • A voltage signal pick-off can be implemented in the measuring line using this terminal block, enabling the signal to be used as an analog signal for process computers

Key Commercial Data

Orderkey 2775250
Packing unit 1 pc
Minimum order quantity 50 pc
GTIN 4046356342995
Weight per Piece (excluding packing) 15.600 g
Custom tariff number 85369010
Country of origin PL (Poland)


586 Fulling Mill Road
Middletown, PA 17057
(800) 888-7388

  • Create PDF
  • Send by Email
  • Feedback