D-SUB bus connector - SUBCON-PLUS-CAN/SC2 - 2708999

D-SUB plug, 9-pos. socket, two 35° cable entries less than to two terminal block rows, bus system: CAN, CANopen, SafetyBUS p up to 1 Mbps, termination resistor can be switched on via slide switch, pin assignment: 2,3,7,9; screw connection terminal blocks


Save money: Best price starts from {0} pieces!


Technical data




Product Description

The SUBCON-PLUS-CAN/... D-SUB series is specifically designed for use in CAN systems. Under field conditions, it enables the quick and easy connection of the incoming and outgoing bus line.
The terminating resistor is already integrated in all versions. It can be connected externally by means of a slide switch. At the same time, the outgoing bus segment is switched off. This makes it easy to start up segment by segment while incorrect terminations are avoided.
A special feature of the 35° angled connector is that the internal connection unit can be turned round. Whether the cable is to be inserted from the right or left can thus be decided on-site.

Your advantages

  • Separate terminal blocks for bus cables
  • Segment-by-segment startup
  • High transmission speed
  • Flexibility in terms of cable entry selection
  • High level of EMC
  • Assembly under field conditions
  • Suitable for bus cables according to CiA Draft Recommendation 303-1 with an outside diameter of 8 mm
  • Termination resistor can be connected
  • Change to the D-SUB orientation through a reversible connection block
Logo Logo Logo

Key Commercial Data

Orderkey 2708999
Packing unit 1 pc
Catalog page Page 448 (C-6-2019)
GTIN 4046356082341
Weight per Piece (excluding packing) 35.800 g
Custom tariff number 85366990
Country of origin DE (Germany)


586 Fulling Mill Road
Middletown, PA 17057
(800) 888-7388

  • Create PDF
  • Send by Email
  • Feedback