Software - FL NETWORK MANAGER BASIC - 2702889

FL Network Manager, SNMP-based configuration and firmware update software, for easy startup of Managed Switches



Technical data


License information

Intended use for the software Network configuration
Firmware update
IP assignment via BootP, DHCP, DCP
Handling of configuration files
Multi-device configuration
SNMP scripting
Network representation
Back to top


Basic functions The FL Network Manager Basic software simplifies the startup of Managed Switches and provides a central configuration point
With just a few clicks, the Network Manager identifies the network participants and, in addition to IP parameter assignment, enables easy multi-device firmware updates and configuration of the most important Industrial Ethernet functions for different types of devices, all at the same time.
Expanded functionality The Network Manager is not limited to a maximum number of nodes
Associated hardware Ethernet infrastructure components
Back to top

Hardware requirements

Hard disk min. 1 GByte
RAM 2 GByte
CPU > 1.5 GHz
Interfaces Ethernet Port
Network card Correctly configured ETHERNET network card with TCP/IP protocol stack
Optical drive CD-RW/DVD-RW
Screen resolution (Full HD) (Min. HD-ready)
Back to top

Software requirements

Operating system Windows® 10
Windows® 8.1 (32-Bit/64-Bit)
Windows® 7 (32-Bit/64-Bit)
Note about the operating system .NET Framework 4.7.1 required
Back to top



eCl@ss 10.0.1 19240201
eCl@ss 4.0 27250270
eCl@ss 4.1 27250270
eCl@ss 5.0 27242501
eCl@ss 5.1 27250580
eCl@ss 6.0 19240200
eCl@ss 7.0 19240201
eCl@ss 8.0 19240201
eCl@ss 9.0 19240201
Back to top


ETIM 3.0 EC001435
ETIM 4.0 EC000501
ETIM 5.0 EC000501
ETIM 6.0 EC000501
ETIM 7.0 EC000501
Back to top


UNSPSC 6.01 43172015
UNSPSC 7.0901 43201404
UNSPSC 11 81111810
UNSPSC 12.01 43232401
UNSPSC 13.2 43232401
Back to top


586 Fulling Mill Road
Middletown, PA 17057
(800) 888-7388

  • Create PDF
  • Send by Email
  • Feedback