Inline terminal - IB IL AO 2/UI-PAC - 2700775

Inline, Analog output terminal, Analog outputs: 2, 0 V ... 10 V, -10 V ... 10 V, 0 mA ... 20 mA, 4 mA ... 20 mA, -20 mA ... 20 mA, connection method: 2-wire, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connector and labeling field

Price:

Overview

Technical data

Accessories

Approvals

Downloads

Drawings



Connection diagram  

Connection diagram

Block diagram  

Block diagram



Dimensional drawing  

Dimensional drawing

Back to top

Note

Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
Back to top

Dimensions

Dimensional drawing
Width 12.2 mm
Height 119.8 mm
Depth 71.5 mm
Note on dimensions Housing dimensions
Back to top

Ambient conditions

Ambient temperature (operation) -25 °C ... 55 °C
Ambient temperature (storage/transport) -25 °C ... 85 °C
Permissible humidity (operation) 10 % ... 95 % (according to DIN EN 61131-2)
Permissible humidity (storage/transport) 10 % ... 95 % (according to DIN EN 61131-2)
Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level)
Degree of protection IP20
Back to top

General

Mounting type DIN rail
Net weight 66 g
Note on weight specifications with connector
Diagnostics messages Failure of the internal I/O supply I/O error message sent to the bus coupler
I/O supply failure Message in the diagnostic code (in the IB IL format)
Short circuit/overload of the outputs Message in the diagnostic code (in the IB IL format)
Configuration invalid Message in the diagnostic code (in the IB IL format)
Back to top

Interfaces

Designation Inline local bus
No. of channels 2
Connection method Inline data jumper
Transmission speed 500 kbps
Transmission physics Copper
Back to top

Inline potentials

Designation Communications power (UL)
Supply voltage 7.5 V DC (via voltage jumper)
Current consumption typ. 55 mA
max. 65 mA
Designation Supply of analog modules (UANA)
Supply voltage 24 V DC (via voltage jumper)
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current consumption typ. 24 mA (No-load)
max. 30 mA (No-load)
typ. 38 mA (Nominal voltage load (UOUT1/2 = 10 V, RL = 1 kΩ))
max. 45 mA (Nominal voltage load (UOUT1/2 = 10 V, RL = 1 kΩ))
typ. 65 mA (Nominal current load (IOUT1/2 = 20 mA, RL = 0 Ω))
max. 75 mA (Nominal current load (IOUT1/2 = 20 mA, RL = 0 Ω))
Power consumption typ. 1.32 W (Nominal voltage load (UOUT1/2 = 10 V, RL = 1 kΩ))
Back to top

Analog outputs

Number of outputs 2
Connection technology 2-wire
Note regarding the connection technology shielded
Output name Analog outputs
D/A conversion time typ. 10 µs
D/A converter resolution 12 bit
Type of protection Short-circuit and overload protection
Transient protection
Protective circuit/component Electronic
Suppressor diode
Data formats IB IL, S7-compatible
Representation of output values 12 bits (11 bits + sign bit)
Process data update bus-synchronous
Current output signal 0 mA ... 20 mA
4 mA ... 20 mA
-20 mA ... 20 mA
Load/output load current output ≤ 450 Ω
Voltage output signal 0 V ... 10 V
-10 V ... 10 V
Load/output load voltage output > 1 kΩ
Precision typ. 0.1 % (of output range final value)
Permissible cable length max. 250 m (The specifications refer to nominal operation after complying with installation instructions. The specifications refer to the following reference cable type: Shielded power station cable: LiYCY; 2 x 2 x 0,5 mm²; VDE0812)
Back to top

Electrical isolation

Test section 7.5 V supply (bus logics)/24 V analog supply (analog I/O) 500 V AC 50 Hz 1 min.
7.5 V supply (bus logic)/functional ground 500 V AC 50 Hz 1 min.
24 V analog supply (analog I/O)/functional ground 500 V AC 50 Hz 1 min.
Back to top

Standards and Regulations

Protection class III (IEC 61140, EN 61140, VDE 0140-1)
Back to top

Environmental Product Compliance

REACh SVHC Lead 7439-92-1
China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Back to top

Classifications

eCl@ss

eCl@ss 10.0.1 27242601
eCl@ss 4.0 27250300
eCl@ss 4.1 27250300
eCl@ss 5.0 27250300
eCl@ss 5.1 27242600
eCl@ss 6.0 27242600
eCl@ss 7.0 27242601
eCl@ss 8.0 27242601
eCl@ss 9.0 27242601
Back to top

ETIM

ETIM 3.0 EC001596
ETIM 4.0 EC001596
ETIM 5.0 EC001596
ETIM 6.0 EC001596
ETIM 7.0 EC001596
Back to top

UNSPSC

UNSPSC 6.01 43172015
UNSPSC 7.0901 43201404
UNSPSC 11 43172015
UNSPSC 12.01 43201404
UNSPSC 13.2 32151602
UNSPSC 18.0 32151602
UNSPSC 19.0 32151602
UNSPSC 20.0 32151602
UNSPSC 21.0 32151602
Back to top

PHOENIX CONTACT

586 Fulling Mill Road
Middletown, PA 17057
(800) 888-7388

  • Create PDF
  • Send by Email
  • Feedback