Router - FL MGUARD RS4000 TX/TX - 2700634

The figure shows a version of the product

Security appliance in metal housing, with extended temperature range, SD card slot,
intelligent firewall with full scope of functions for maximum security and easy configuration, router with NAT/1:1 NAT, optional VPN/CIFS integrity monitoring



Technical data





Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
Back to top


Width 45 mm
Height 130 mm
Depth 114 mm
Back to top

Ambient conditions

Degree of protection IP20
Ambient temperature (operation) -20 °C ... 60 °C
Ambient temperature (storage/transport) -20 °C ... 70 °C
Permissible humidity (operation) 5 % ... 95 % (non-condensing)
Back to top


Interface Ethernet
No. of ports 2 (RJ45 ports)
Transmission physics Ethernet in RJ45 twisted pair
Transmission speed 10/100 Mbps
Transmission length 100 m (per segment)
Signal LEDs Supply voltage, data transmission, error, link, activity
Interface Signal contact
Connection method Plug-in/screw connection via COMBICON
Back to top


Basic functions Router with intelligent firewall (VPN, 10 tunnels as an option, up to 250 with additional license), CIFS Integrity Monitoring (as an option), metal housing, slot for SD memory card, extended temperature range, high-performance firewall/VPN (as an option): up to 124 Mbps/40 Mbps (as an option)
Supported browsers HTTPS support required
Processor 330 MHz
Status and diagnostic indicators LEDs:P1, P2, Fault, State, Error, LAN, WAN
Signal contact control voltage 24 V DC (typical)
Signal contact control current 250 mA (short-circuit-proof)
Back to top

Security functions

Dynamic Host Configuration Protocol (DHCP) support Server or Relay Agent
Network Time Protocol (NTP) client Client
Link Layer Discovery Protocol (LLDP) As per protocol 802.2
Remote Syslog Logging On externals server
Virtual private network (VPN) throughput max. 40 Mbps (Router mode, VPN bidirectional throughput)
max. 27 Mbps (Stealth mode, VPN bidirectional throughput)
Number of VPN tunnels 0 (up to 250 tunnels with additional license as an option)
Encryption methods DES, 3DES, AES-128, -192, -256
Internet Protocol Security (IPsec) mode ESP tunnel / ESP transport
Authentication X.509v3 certificates with RSA or PSK
Data integrity MD5, SHA-1, SHA 256, SHA-512
Firewall data throughput max. 124 Mbps (Router mode, default firewall rules, bidirectional throughput)
max. 61 Mbps (Stealth mode, default firewall rules, bidirectional throughput)
Firewall rules Configurable stateful inspection firewall with full scope of functions
Filtering MAC and IP addresses, ports, protocols
Protection against IP spoofing, DoS and Syn Flood Protection
Routing Standard routing, NAT, 1:1-NAT, port forwarding
Back to top

Network expansion parameters

Maximum conductor length (twisted pair) 100 m
Back to top

Supply voltage

Supply voltage 24 V DC (redundant)
Residual ripple 3.6 VPP (within the permitted voltage range)
Supply voltage range 11 V DC ... 36 V DC
Typical current consumption 100 mA (at US = 24 V DC)
Max. current consumption 0.24 A (unloaded outputs)
Back to top


Mounting type DIN rail
Type AX Stand-alone
Net weight 725 g
Housing material Metal
Back to top

Conformity with EMC directives

Developed in acc. with standard IEC 61000-6-2
Test standard IEC 61000-4-2 (ESD)
Test result 6 kV contact discharge, 8 kV air discharge
Test standard IEC 61000-4-3 (immunity to radiated interference)
Test result 10 V/m (80 MHz ... 2000 MHz)
Test standard IEC 61000-4-4 (burst)
Test result 2 kV power line, 1kV data line
Test standard IEC 61000-4-5 (surge)
Test result power line: 2 kV (line/earth), 1 kV (line/line), 1kV data line
Test standard IEC 61000-4-6 (immunity to conducted interference)
Test result 3 V (10 kHz ... 150 kHz), 10 V (150 kHz ... 80 MHz)
Back to top

Standards and Regulations

Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
Type of test Shock in acc. with EN 60068-2-27/IEC 60068-2-27
Test result Half-sine 30g, 18 ms, 3 axes
Type of test Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6
Test result 5g, 150 Hz
Noise emission EN 55022 / Class B
Noise immunity EN 61000-6-2:2005
Back to top

Environmental Product Compliance

Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Back to top



eCl@ss 4.0 27240400
eCl@ss 4.1 27240400
eCl@ss 5.0 19030100
eCl@ss 5.1 19030100
eCl@ss 6.0 19170100
eCl@ss 7.0 19170103
eCl@ss 8.0 19170103
eCl@ss 9.0 19170103
Back to top


ETIM 3.0 EC001423
ETIM 4.0 EC001478
ETIM 5.0 EC001478
ETIM 6.0 EC001478
ETIM 7.0 EC001478
Back to top


UNSPSC 6.01 20142601
UNSPSC 7.0901 20142601
UNSPSC 11 20142601
UNSPSC 12.01 20142601
UNSPSC 13.2 43222609
Back to top


586 Fulling Mill Road
Middletown, PA 17057
(800) 888-7388

  • Create PDF
  • Send by Email
  • Feedback