I/O module - AXL F AO4 1H - 2688527

Axioline F, Analog output module, Analog outputs: 4, 0 V ... 5 V, -5 V ... 5 V, 0 V ... 10 V, -10 V ... 10 V, 0 mA ... 20 mA, 4 mA ... 20 mA, connection method: 2-wire, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connectors

Price:

Overview

Technical data

Accessories

Approvals

Downloads

Drawings



Connection diagram  

Connection diagram
Connection for voltage and current output

Block diagram  

Block diagram
Internal wiring of the terminal points



Dimensional drawing  

Dimensional drawing

Back to top

Dimensions

Dimensional drawing
Width 35 mm
Height 126.1 mm
Depth 54 mm
Note on dimensions The depth is valid when a TH 35-7,5 DIN rail is used (according to EN 60715).
Back to top

Ambient conditions

Ambient temperature (operation) -25 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Permissible humidity (operation) 5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing)
Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level)
Degree of protection IP20
Back to top

Connection data

Designation Axioline F connector
Connection method Push-in connection
Note on the connection method Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 1.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 1.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 16
Stripping length 8 mm
Back to top

General

Mounting type DIN rail
Color traffic grey A RAL 7042
Net weight 145 g
Note on weight specifications with connectors and bus base module
Mounting position any (no temperature derating)
Back to top

Interfaces

Designation Axioline F local bus
No. of channels 2
Connection method Bus base module
Transmission speed 100 Mbps
Back to top

Axioline potentials

Designation Axioline F local bus supply (UBus)
Supply voltage 5 V DC (via bus base module)
Current consumption typ. 120 mA
max. 150 mA
Designation Supply for analog modules (UA)
Supply voltage 24 V DC
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current consumption typ. 60 mA (4 voltage channels, 10 V output)
max. 85 mA (4 voltage channels, 10 V output)
max. 110 mA (4 current channels, 20 mA output, 500 Ω load)
max. 125 mA (4 current channels, 24 mA output, 500 Ω load)
Power consumption max. 3 W (at UA)
Protective circuit Surge protection electronic (35 V, 0.5 s)
Reverse polarity protection Polarity protection diode
Transient protection Suppressor diode
Power consumption typ. 2.04 W (at UBus and UA)
max. 3.75 W (at UBus and UA)
Back to top

Analog outputs

Number of outputs 4
Connection method Push-in connection
Connection technology 2-wire
Note regarding the connection technology shielded, twisted pair
Output name Analog outputs
D/A converter resolution 16 bit
Type of protection Short-circuit and overload protection
Transient protection
Protective circuit/component electronic
Suppressor diode
Data formats IB IL, S7-compatible
Representation of output values 16 bits (15 bits + sign)
Process data update 140 µs
Current output signal 0 mA ... 20 mA
4 mA ... 20 mA
Load/output load current output ≤ 500 Ω
Voltage output signal 0 V ... 5 V
-5 V ... 5 V
0 V ... 10 V
-10 V ... 10 V
Load/output load voltage output ≥ 1 kΩ
Precision typ. 0.1 % (of output range final value)
Back to top

Electrical isolation

Test section 5 V supply of the local bus (UBus) / 24 V supply (I/Os) 500 V AC 50 Hz 1 min.
5 V supply (logic)/analog outputs 500 V AC 50 Hz 1 min.
5 V supply of the local bus (UBus) / functional ground 500 V AC 50 Hz 1 min.
24 V supply (I/O)/analog outputs 500 V AC 50 Hz 1 min.
24 V supply (I/O)/functional ground 500 V AC 50 Hz 1 min.
Analog outputs/functional ground 500 V AC 50 Hz 1 min.
Back to top

Standards and Regulations

Mechanical tests Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
Shock in acc. with EN 60068-2-27/IEC 60068-2-27 30g
Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g
Protection class III (IEC 61140, EN 61140, VDE 0140-1)
Back to top

Environmental Product Compliance

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Back to top

Classifications

eCl@ss

eCl@ss 10.0.1 27242601
eCl@ss 4.0 27240400
eCl@ss 4.1 27240400
eCl@ss 5.0 27242200
eCl@ss 5.1 27242600
eCl@ss 6.0 27242600
eCl@ss 7.0 27242601
eCl@ss 8.0 27242601
eCl@ss 9.0 27242601
Back to top

ETIM

ETIM 3.0 EC001599
ETIM 4.0 EC001599
ETIM 5.0 EC001596
ETIM 6.0 EC001596
ETIM 7.0 EC001596
Back to top

UNSPSC

UNSPSC 6.01 43172015
UNSPSC 7.0901 43201404
UNSPSC 11 39121311
UNSPSC 12.01 39121311
UNSPSC 13.2 32151602
UNSPSC 18.0 32151602
UNSPSC 19.0 32151602
UNSPSC 20.0 32151602
UNSPSC 21.0 32151602
Back to top

PHOENIX CONTACT

586 Fulling Mill Road
Middletown, PA 17057
(800) 888-7388

  • Create PDF
  • Send by Email
  • Feedback