Security Appliance - TC MGUARD RS2000 4G ATT VPN - 1010464

Security appliance, Version for AT&T (US), 4G mobile network interface, SD card slot, 2 VPN tunnels, firewall for easy configuration, router with NAT/1:1 NAT, 4 port switch

Price:

Overview

Technical data

Accessories

Approvals

Downloads

Drawings



Schematic diagram  

Schematic diagram
Remove SIM card holder

Schematic diagram  

Schematic diagram
Insert the SIM card



Schematic diagram  

Schematic diagram
Mounting

Back to top

Note

Trade restriction The products are offered exclusively for export outside the EU and the European Economic Area.
Back to top

Dimensions

Width 45 mm
Height 130 mm
Depth 114 mm
Back to top

Ambient conditions

Ambient temperature (operation) -40 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 70 °C
Permissible humidity (operation) 5 % ... 95 % (non-condensing)
Altitude ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
Degree of protection IP20 (Manufacturer's declaration)
Back to top

General

Electrical isolation VCC // PE
Test voltage data interface/data interface 1 kV (50 Hz, 1 min., manufacturer's declaration)
Test voltage data interface/power supply 1 kV (50 Hz, 1 min., manufacturer's declaration)
Electromagnetic compatibility Conformance with RED Directive 2014/53/EU
Net weight 645.8 g
Housing material Metal
Color silver
MTTF 582 Years (SN 29500 standard, temperature 25 °C, operating cycle 21 % (5 days a week, 8 hours a day))
271 Years (SN 29500 standard, temperature 40 °C, operating cycle 34.25 % (5 days a week, 12 hours a day))
114 Years (SN 29500 standard, temperature 40 °C, operating cycle 100 % (7 days a week, 24 hours a day))
Degree of pollution 2
Wireless licences USA
Back to top

Power supply

Supply voltage range 11 V DC ... 36 V DC (via pluggable COMBICON screw terminal block)
Max. current consumption 1.8 A (at 11 V DC (incl. 3 x 125 mA for the outputs))
Typical current consumption < 320 mA (24 V DC)
Conductor cross section solid max. 2.50 mm²
Conductor cross section solid min. 0.20 mm²
Max. AWG conductor cross section, flexible 14
Min. AWG conductor cross section, flexible 24
Back to top

Interfaces

Interface 1 Ethernet interface, 10/100Base-T(X) in acc. with IEEE 802.3u
Interface Ethernet
No. of ports 4
Connection method RJ45
Transmission length 100 m (shielded twisted pair)
Protocols supported TCP/IP, UDP/IP, FTP, HTTP
Auxiliary protocols ARP, DHCP, PING (ICMP), SNMP V1, SMTP
Basic functions Router with simplified 2-click firewall and VPN for 2 tunnels (fixed), metal housing, slot for any SD memory card
Interface 2 V.24 (RS-232) interface in acc. with ITU-T V.28, EIA/TIA-232, DIN 66259-1
Interface RS-232
Connection method D-SUB 9 plug
File format/coding UART/NRZ: 8 Data, 1/2 Stop, None/Even/Odd Parity
Transmission length 15 m
Data flow control/protocols Software handshake, Xon/Xoff or hardware handshake RTS/CTS
Serial transmission speed 9.6; 19.2; 38.4; 57.6; 115.2 kbps
Back to top

Wireless interface

Interface description LTE (FDD) / UMTS
Frequency 850 MHz (UMTS/HSPA B5)
1900 MHz (UMTS/HSPA B2)
700 MHz (LTE B13 / B17)
850 MHz (LTE B5)
1700 MHz (LTE B4)
1900 MHz (LTE B2)
Data rate ≤ 150 Mbps (LTE (DL))
≤ 50 Mbps (LTE (UL))
Antenna 50 Ω impedance SMA antenna socket
SIM interface 1 1.8 volt, 3 volt
UMTS HSPA 3GPP R9
LTE CAT4
Country support USA
Back to top

Function

Web-based management yes
Management Web-based management, SNMP
Security functions Supported Supported Supported DES, 3DES, AES-128, -192, -256 ESP tunnel / ESP transport Supported Supported X.509v3 certificates with RSA or PSK MD5, SHA-1 Quick mode, Main mode, PFS RFC 3706 Incoming or outgoing traffic Standard routing, NAT, 1:1-NAT, port forwarding
Back to top

Digital outputs

Output name Digital output, resistive load
Number of outputs 3
Voltage output signal 10 V DC ... 30 V DC (depending on the operating voltage)
Current output signal ≤ 125 mA (Short-circuit-proof)
Back to top

Digital inputs

Description of the input Digital input
Number of inputs 3
Voltage input signal 10 V DC ... 30 V DC
Current input signal 5 mA
Back to top

Conformance/approvals

Designation UL, USA/Canada
Identification Class I, Zone 2, AEx nA IIC T4 / Ex nA IIC T4 Gc
Class I, Div. 2, Groups A, B, C, D T4
Designation Corrosive gas test
Identification ISA-S71.04-1985 G3 Harsh Group A
Back to top

Standards and Regulations

Electromagnetic compatibility Conformance with RED Directive 2014/53/EU
Type of test Free fall in acc. with IEC 60068-2-32
Test result 1 m
Type of test Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6
Test result 5g, 10...150 Hz, 2.5 h, in XYZ direction
Type of test Shock in acc. with EN 60068-2-27/IEC 60068-2-27
Test result Operation: 15g, 11 ms period, half-sine shock pulse
Type of test Shock in acc. with EN 60068-2-27/IEC 60068-2-27
Test result Storage: 30g, 11 ms period, half-sine shock pulse
Free from substances that could impair the application of coating according to P-VW 3.10.7 57 65 0 VW-AUDI-Seat central standard
Standards/regulations EN 61000-4-2
Contact discharge ± 6 kV (Test Level 3)
Standards/regulations EN 61000-4-3
Frequency range 80 MHz ... 3 GHz (Test Level 3)
Standards/regulations EN 61000-4-4
Comments Criterion B
Standards/regulations EN 61000-4-5
Signal ± 1 kV (Data line, asymmetrical)
Standards/regulations EN 61000-6-4
EN 61000-4-6
Frequency range 0.15 MHz ... 80 MHz
Back to top

Environmental Product Compliance

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Back to top

Classifications

eCl@ss

eCl@ss 5.0 19030100
eCl@ss 5.1 19030100
eCl@ss 6.0 19170100
eCl@ss 7.0 19170103
eCl@ss 8.0 19170103
eCl@ss 9.0 19170103
Back to top

ETIM

ETIM 5.0 EC001478
ETIM 6.0 EC001478
ETIM 7.0 EC001478
Back to top

PHOENIX CONTACT

586 Fulling Mill Road
Middletown, PA 17057
(800) 888-7388

  • Create PDF
  • Send by Email
  • Feedback