Device connector, front mounting - CA-06S1N8A6Y00 - 1619875

Device connector for front wall, straight, shielded: yes, for standard and SPEEDCON interlock, M23, No. of pos.: 6, type of contact: Socket, Crimp connection, Axial seal, Central fastening M20 x 1.5



Technical data





Dimensional drawing  

Dimensional drawing

Dimensional drawing  

Dimensional drawing
Installation dimensions

Schematic diagram  

Schematic diagram

Back to top

Temperature range

Ambient temperature (operation) -40 °C ... 125 °C
Back to top

Data of the insulating body

Note Order information: Order crimp contacts Ø 2 mm separately
Coding N
Insulator material PA 6.6
Contact connection method Crimp connection
Type of contacts Socket
Application Signal
Number of positions 6
Contact diameter of signal contacts 2 mm
Litz wire cross section of signal contacts min. 1 mm²
Litz wire cross section of signal contacts max. 2.5 mm²
Nominal current per signal contact at 25°C 20 A
Nominal voltage, signal contact 300 V
Rated surge voltage 2.5 kV
Overvoltage category II
Degree of pollution 3
Back to top

Housing data

Note Order information: If necessary, order locking nut separately
Housing material GD-Zn
Type of locking for standard and SPEEDCON interlock
Degree of protection (when plugged in) IP67
Thread type M23
Back to top

Environmental Product Compliance

China RoHS Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Back to top



eCl@ss 4.0 272607xx
eCl@ss 4.1 27260701
eCl@ss 5.0 27143424
eCl@ss 5.1 27143400
eCl@ss 6.0 27279200
eCl@ss 7.0 27440103
eCl@ss 8.0 27440103
eCl@ss 9.0 27440102
Back to top


ETIM 3.0 EC001121
ETIM 4.0 EC002635
ETIM 5.0 EC002061
ETIM 6.0 EC002061
Back to top


UNSPSC 6.01 43172015
UNSPSC 7.0901 43201404
UNSPSC 11 43172015
UNSPSC 12.01 43201404
UNSPSC 13.2 39121413
Back to top


586 Fulling Mill Road
Middletown, PA 17057
(800) 888-7388

  • Create PDF
  • Send by Email
  • Feedback