- Home
-
Products
-
Measurement and control technology
-
Current and voltage measurement
-
Product list Current protectors up to 16 A AC
- Current monitoring - MCR-SL-S- 16-SP- 24 - 2864464
Back to top
Back to top
Back to top
Back to top
Back to top
Back to top
Back to top
Back to top
Back to top
Back to top
Back to top
Back to top
Note
| Utilization restriction | EMC: class A product, see manufacturer's declaration in the download area |
|---|
Ambient conditions
| Ambient temperature (operation) | -20 °C ... 65 °C |
|---|---|
| Ambient temperature (storage/transport) | -40 °C ... 85 °C (non-condensing) |
| Maximum altitude | ≤ 2000 m |
| Degree of protection | IP20 |
| Noise immunity | EN 61000-6-2 When being exposed to interference, there may be minimal deviations. |
Input data
| Input | Current measuring input |
|---|---|
| Input current range | 0 A AC ... 16 A |
| Impulse form | Sine |
| Overload capacity | 2 x IN (continuous) |
| Nominal frequency fN | 50 Hz |
| 60 Hz | |
| Frequency measuring range | 45 Hz ... 65 Hz |
Switching output
| Output name | Relay output |
|---|---|
| Contact type | 1 changeover contact |
| Contact material | AgSnO, hard gold-plated |
| Maximum switching voltage | 30 V AC |
| 36 V DC | |
| 250 V AC (when the gold layer is destroyed) | |
| Limiting continuous current | 50 mA (for gold layer, 30 V AC/ 36 V DC) |
| 2 A (in case of a destroyed gold layer, 250 V AC) | |
| Setting range of the response delay | typ. 0.1 s ... 10 s (Adjustable using a potentiometer) |
Connection data
| Connection method | Screw connection |
|---|---|
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section solid | 0.2 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 14 |
General
| Maximum temperature coefficient | < 0.02 %/K |
|---|---|
| Step response (10-90%) | 40 ms |
| Overvoltage category | III |
| Degree of pollution | 2 |
| Rated insulation voltage | 300 V AC (to earth) |
| Test voltage input/output | 3.5 kV (50 Hz, 1 min.) |
| Test voltage input/power supply | 3.5 kV (50 Hz, 1 min.) |
| Electromagnetic compatibility | Conformance with EMC directive |
| Noise emission | EN 61000-6-4 |
| Noise immunity | EN 61000-6-2 When being exposed to interference, there may be minimal deviations. |
| Color | green |
| Housing material | Polyamide PA non-reinforced |
| Mounting position | any |
Standards and Regulations
| Electromagnetic compatibility | Conformance with EMC directive |
|---|---|
| Noise emission | EN 61000-6-4 |
| Connection in acc. with standard | CUL |
| Conformance | CE-compliant |
Environmental Product Compliance
| REACh SVHC | Lead 7439-92-1 |
|---|---|
| China RoHS | Environmentally Friendly Use Period = 50 years |
| For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
Classifications
eCl@ss
| eCl@ss 10.0.1 | 27371802 |
|---|---|
| eCl@ss 11.0 | 27371802 |
| eCl@ss 4.0 | 27210900 |
| eCl@ss 4.1 | 27210900 |
| eCl@ss 5.0 | 27371800 |
| eCl@ss 5.1 | 27210900 |
| eCl@ss 6.0 | 27371800 |
| eCl@ss 7.0 | 27371802 |
| eCl@ss 8.0 | 27371802 |
| eCl@ss 9.0 | 27371802 |
ETIM
| ETIM 2.0 | EC001440 |
|---|---|
| ETIM 3.0 | EC001440 |
| ETIM 4.0 | EC001440 |
| ETIM 5.0 | EC001440 |
| ETIM 6.0 | EC001440 |
| ETIM 7.0 | EC001440 |
UNSPSC
| UNSPSC 6.01 | 30211916 |
|---|---|
| UNSPSC 7.0901 | 39121535 |
| UNSPSC 11 | 39121535 |
| UNSPSC 12.01 | 39121535 |
| UNSPSC 13.2 | 41113637 |
| UNSPSC 18.0 | 41113637 |
| UNSPSC 19.0 | 41113637 |
| UNSPSC 20.0 | 41113637 |
| UNSPSC 21.0 | 41113637 |
PHOENIX CONTACT
SEA Pte. Ltd.
105 Eunos Avenue 3
#04-00
Singapore 409836
#04-00
Singapore 409836
+65 6228 4900
"$pageName" on