Optocoupler - PLC-OSC-120UC/ 24DC/ 2/C1D2 - 5603262

PLC-INTERFACE, consisting of DIN rail-mountable basic terminal block with screw connection and plug-in miniature solid-state relay, input: 120 V AC/110 V DC, output: 3 - 33 V DC/3 A, UL/cUL: approved for use in Ex Zone Class I, Div. 2

Price:

Overview

Technical data

Accessories

Approvals

Downloads

Drawings



Diagram  

Diagram

Circuit diagram  

Circuit diagram



Back to top

Note

Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
Back to top

Dimensions

Width 6.2 mm
Height 80 mm
Depth 94 mm
Back to top

Ambient conditions

Ambient temperature (operation) -20 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Back to top

Input data

Nominal input voltage UN 120 V AC
110 V DC
Input voltage range in reference to UN 0.9 ... 1.1
Input voltage range 108 V AC ... 132 V AC
99 V DC ... 121 V DC
Switching threshold "0" signal in reference to UN ≤ 0.3
Switching threshold "1" signal in reference to UN ≥ 0.8
Typical input current at UN 3.5 mA
Typical response time 3.5 ms (at UN)
Typical turn-off time 7 ms (at UN)
Operating voltage display Yellow LED
Type of protection Bridge rectifier
Protective circuit/component Bridge rectifier
Transmission frequency 10 Hz
Power dissipation for nominal condition 0.42 W
Back to top

Output data

Output voltage range 3 V DC ... 33 V DC
Limiting continuous current 3 A
Maximum inrush current 15 A (10 ms)
Voltage drop at max. limiting continuous current ≤ 200 mV
Output circuit 2-wire, floating
Type of protection Reverse polarity protection
Surge protection
Protective circuit/component Polarity protection diode
Back to top

General

Test voltage input/output 2.5 kV (50 Hz, 1 min.)
Mounting position any
Assembly instructions In rows with zero spacing
Operating mode 100% operating factor
Back to top

Connection data

Connection name Input side
Connection method Screw connection
Stripping length 8 mm
Screw thread M 3
Conductor cross section solid 0.14 mm² ... 2.5 mm²
Conductor cross section flexible 0.14 mm² ... 2.5 mm²
Conductor cross section AWG 26 ... 14
Back to top

Connection data 2

Connection name Output side
Connection method Screw connection
Stripping length 8 mm
Screw thread M 3
Conductor cross section solid 0.14 mm² ... 2.5 mm²
Conductor cross section flexible 0.14 mm² ... 2.5 mm²
Conductor cross section AWG 26 ... 14
Back to top

Standards and Regulations

Designation Standards/regulations
Standards/regulations IEC 60664
EN 50178
Insulation Basic insulation
Pollution degree 2
Overvoltage category III
Back to top

Conformance/approvals

Designation CE
Identification CE-compliant
Designation UL, USA
Identification Class I, Zone 2, AEx nA nC IIC T6
Designation UL, USA/Canada
Identification Class I, Div. 2, Groups A, B, C, D
Designation UL, Canada
Identification Class I, Zone 2, Ex nA nC IIC Gc T6 X
Back to top

Environmental Product Compliance

REACh SVHC
Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Back to top

Classifications

eCl@ss

eCl@ss 4.0 27371100
eCl@ss 4.1 27371100
eCl@ss 5.0 27371000
eCl@ss 5.1 27371000
eCl@ss 6.0 27371600
eCl@ss 7.0 27371604
eCl@ss 8.0 27371604
eCl@ss 9.0 27371604
Back to top

ETIM

ETIM 2.0 EC001504
ETIM 3.0 EC001504
ETIM 4.0 EC001504
ETIM 5.0 EC001504
ETIM 6.0 EC001504
ETIM 7.0 EC001504
Back to top

UNSPSC

UNSPSC 6.01 30211916
UNSPSC 7.0901 39121542
UNSPSC 11 39121542
UNSPSC 12.01 39121542
UNSPSC 13.2 39122326
Back to top

PHOENIX CONTACT
SEA Pte. Ltd.

105 Eunos Avenue 3
#04-00
Singapore 409836
+65 6228 4900
  • Create PDF
  • Recommend
  • Feedback