Sensor/actuator terminal block - PTIO 1,5/S/3-L-R100K/O-M 120V - 3209034

Sensor/actuator terminal block, with 100 kOhm resistor, nom. voltage: 24 V, nominal current: 18 A, connection method: Push-in connection, number of connections: 4, cross section: 0.08 mm² - 1.5 mm², AWG: 28 - 12, width: 3.5 mm, color: gray, mounting type: NS 35/7,5, NS 35/15

Price:

Overview

Technical data

Accessories

Approvals

Downloads

Your advantages

  • Three-conductor output terminal block of the same shape with PE connection in the lower level for wiring actuators
  • Power terminal blocks can be located at any point on the terminal strip for supply or extension purposes
  • Versions with LED for indicating the switching states
  • Easy bridging and potential distribution using the patented plug-in bridges from the CLIPLINE complete system
  • Potential is supplied via the STIO-IN power terminal blocks
  • For space and time-saving wiring of three-conductor initiators and actuators
  • The upper level is for signal wiring, whereas the two lower levels are used to distribute the positive and negative potential
Logo

Key Commercial Data

Orderkey 3209034
Packing unit 50 pc
Minimum order quantity 50 pc
GTIN 4055626176017
Weight per Piece (excluding packing) 7.330 g
Custom tariff number 85369010
Country of origin PL (Poland)

PHOENIX CONTACT
SEA Pte. Ltd.

105 Eunos Avenue 3
#04-00
Singapore 409836
+65 6228 4900
  • Create PDF
  • Recommend
  • Feedback