Products A-Z

Voltage measuring transducers - MACX MCR-VAC - 2906239

MACX MCR voltage transducer, for AC voltages from 0 V ... 20 V AC to 0 ... 660 V AC, output signal: 0 V ... 10 V/0(4) ... 20 mA

Price:

Overview

Technical data

Approvals

Downloads

Drawings

Block diagram  

Block diagram
Back to top

Note

Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
Back to top

Dimensions

Width 22.5 mm
Height 112.8 mm
Depth 114.5 mm
Back to top

Ambient conditions

Ambient temperature (operation) -25 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C (non-condensing)
Maximum altitude ≤ 2000 m
Permissible humidity (operation) 10 % ... 95 % (non-condensing)
Degree of protection IP20
Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Back to top

Input data

Input voltage range 0 V ... 550 V AC
Input resistance 5500 kΩ
Input voltage range 0 V ... 370 V AC
Input resistance 3700 kΩ
Input voltage range 0 V ... 250 V AC
Input resistance 2500 kΩ
Input voltage range 0 V ... 170 V AC
Input resistance 1700 kΩ
Input voltage range 0 V ... 120 V AC
Input resistance 1200 kΩ
Input voltage range 0 V ... 80 V AC
Input resistance 800 kΩ
Input voltage range 0 V ... 54 V AC
Input resistance 800 kΩ
Input voltage range 0 V ... 36 V AC
Input resistance 800 kΩ
Input voltage range 0 V ... 24 V AC
Input resistance 240 kΩ
Nom. voltage + 660 V AC
Back to top

Output data

Output name Voltage output
Voltage output signal 0 V ... 10 V
2 V ... 10 V
Max. output voltage ≤ 11 V
Load/output load voltage output > 10 kΩ
Ripple 50 mV
Output name Current output
Current output signal 0 mA ... 20 mA
4 mA ... 20 mA
Max. output current ≤ 22 mA
Load/output load current output < 500 Ω
Back to top

Power supply

Nominal supply voltage 24 V DC (-20 % ... +25 %)
Supply voltage range 19.2 V DC ... 30 V DC
Max. current consumption < 45 mA
Back to top

Connection data

Connection method Pluggable screw connection
Connection technology Screw connection
Stripping length 8 mm
Screw thread M3
Conductor cross section solid 0.2 mm² ... 2.5 mm²
Conductor cross section flexible 0.2 mm² ... 2.5 mm²
Conductor cross section AWG 24 ... 14
Back to top

General

Maximum transmission error < 1 % (from a measuring range final value, 45 ... 65 Hz)
< 1.3 % (from a measuring range final value, 65 ... 405 Hz)
Maximum temperature coefficient < 0.015 %/K
Frequency measuring range 45 Hz ... 405 Hz
Alignment zero ± 20 %
Alignment span ± 20 %
Step response (10-90%) < 180 ms
Test voltage 5.3 kV AC (50 Hz, 1 min.)
Electromagnetic compatibility Conformance with EMC directive
Noise emission EN 61000-6-4
Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Color gray
Mounting position any
Assembly instructions Can be aligned with spacing = 10 mm
Back to top

Standards and Regulations

Electromagnetic compatibility Conformance with EMC directive
Noise emission EN 61000-6-4
Frequency range 45 Hz ... 405 Hz
Standards/regulations IEC 61010-1
IEC 61010-2-030
Pollution degree 2
Low Voltage Directive Conformance with Low Voltage Directive
Conformance CE-compliant
UL, USA/Canada UL 61010 Listed
Back to top

Conformance/approvals

Designation CE
Identification CE-compliant
Designation UL, USA/Canada
Identification UL 61010 Listed
Back to top

Environmental Product Compliance

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Back to top

Classifications

eCl@ss

eCl@ss 10.0.1 27210125
eCl@ss 11.0 27210125
eCl@ss 4.0 27271100
eCl@ss 5.0 27200300
eCl@ss 5.1 27200300
eCl@ss 6.0 27210100
eCl@ss 7.0 27210125
eCl@ss 8.0 27210125
eCl@ss 9.0 27210125
Back to top

ETIM

ETIM 4.0 EC002477
ETIM 5.0 EC002477
ETIM 6.0 EC002477
ETIM 7.0 EC002477
Back to top

PHOENIX CONTACT
SEA Pte. Ltd.

105 Eunos Avenue 3
#04-00
Singapore 409836
+65 6228 4900
  • Create PDF
  • Recommend
  • Feedback