- Home
-
Products
-
PLCs and I/O systems
-
PLCnext Control
-
Product list PLCnext Technology components
- Controller - AXC F 2152 - 2404267
Back to top
Back to top
Back to top
Back to top
Back to top
Back to top
Back to top
Back to top
Back to top
Back to top
Back to top
Back to top
Back to top
Back to top
Back to top
Note
| Utilization restriction | EMC: class A product, see manufacturer's declaration in the download area |
|---|---|
| Use in potentially explosive areas is not permitted in China. |
Ambient conditions
| Degree of protection | IP20 |
|---|---|
| Ambient temperature (operation) | -25 °C ... 60 °C up to 2000 m above mean sea level (observe derating) |
| -25 °C ... 55 °C up to 3000 m above mean sea level (observe derating) | |
| ≤ 55 °C (with max. 1 A on UBus) | |
| > 55 °C ... 60 °C (only in conjunction with an Axioline F power module AXL F PWR 1H (order number 2688297)) | |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Permissible humidity (operation) | 5 % ... 95 % (according to DIN EN 61131-2) |
| Permissible humidity (storage/transport) | 5 % ... 95 % (according to DIN EN 61131-2) |
| Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Air pressure (storage/transport) | 58 kPa ... 106 kPa (up to 4500 m above mean sea level) |
| Shock | 30g, 11 ms period, half-sine shock pulse, according to IEC 60068-2-27 |
| Vibration (operation) | 5g |
Control system
| Engineering tool | PLCnext Engineer |
|---|---|
| Eclipse | |
| Programming languages supported | Programming in acc. with IEC 61131-3 |
| C++ | |
| C# | |
| Java | |
| Manufacturer-specific |
General data
| Processor | Arm® Cortex®-A9 2x 800 MHz |
|---|---|
| Operating system | Linux |
| RAM | 512 Mbyte DDR3 SDRAM |
IEC 61131 runtime system
| Engineering tool | PLCnext Engineer |
|---|---|
| Eclipse | |
| Program memory | 8 Mbyte |
| Mass storage | 16 Mbyte |
| Retentive mass storage | 48 kByte (NVRAM) |
| Realtime clock | Yes |
| Accuracy realtime clock | 1.73 s/day = 20 ppm at 25 °C |
Fieldbus function
| Amount of process data | max. 8192 Bit (per station) |
|---|---|
| max. 4096 Bit (Axioline F local bus (input)) | |
| max. 4096 Bit (Axioline F local bus (output)) | |
| Number of supported devices | max. 63 (per station) |
| Number of local bus devices that can be connected | max. 63 (observe current consumption) |
| Program memory | 8 Mbyte |
Data interfaces
| Interface | Axioline F local bus |
|---|---|
| Number | 1 |
| Connection method | Bus base module |
| Transmission speed | 100 Mbps |
| Interface | Ethernet |
| Number | 2 |
| Connection method | RJ45 jack |
| Transmission speed | 10/100 Mbps (full duplex) |
| Protocols supported | HTTP |
| HTTPS | |
| SFTP | |
| SNTP | |
| SNMP | |
| IPsec | |
| syslog | |
| OPC UA |
PROFINET
| Device function | PROFINET controller, PROFINET device |
|---|---|
| Specification | Version 2.3 |
| Update rate | min. 1 ms (4 devices) |
| min. 16 ms (64 devices) |
Power supply
| Typical current consumption | typ. 200 mA (without I/Os and UL = 24 V) |
|---|---|
| Max. current consumption | 442 mA |
| Supply voltage | 24 V DC |
| Supply voltage range | 19.2 V DC ... 30 V DC |
| Residual ripple | ± 5 % |
| Power dissipation | max. 10.6 W |
Mechanical design
| Weight | 225.6 g |
|---|---|
| Diagnostics display | No |
| Controller redundancy | yes |
| Note on controller redundancy | applicative system redundancy possible |
| Safety function | No |
Standards and Regulations
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
|---|---|
| Interference emission | Noise emission test as per EN 61000-6-4 |
| Immunity to surge | Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical), fieldbus cable shield: ±1 kV |
| Immunity to burst | Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV |
| Immunity to EF | Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m |
| Immunity to ESD | Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge |
| Immunity to conducted interference | Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V |
| Vibration (storage/transport) | 5g |
| Shock | 30g, 11 ms period, half-sine shock pulse, according to IEC 60068-2-27 |
| Vibration (operation) | 5g |
| Shock (operation) | 10g (Bump endurance test according to DIN EN 60068-2-27) |
Environmental Product Compliance
| REACh SVHC | Lead 7439-92-1 |
|---|---|
| China RoHS | Environmentally Friendly Use Period = 50 years |
| For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
Classifications
eCl@ss
| eCl@ss 10.0.1 | 27242207 |
|---|---|
| eCl@ss 11.0 | 27242207 |
| eCl@ss 4.0 | 27240602 |
| eCl@ss 4.1 | 27240602 |
| eCl@ss 5.0 | 27242700 |
| eCl@ss 5.1 | 27242700 |
| eCl@ss 6.0 | 27242200 |
| eCl@ss 7.0 | 27242207 |
| eCl@ss 9.0 | 27242207 |
ETIM
| ETIM 3.0 | EC001045 |
|---|---|
| ETIM 4.0 | EC001435 |
| ETIM 5.0 | EC000236 |
| ETIM 6.0 | EC000236 |
| ETIM 7.0 | EC000236 |
"$pageName" on