Sensor/actuator terminal block - DOK 1,5 - 2717016

Sensor/actuator terminal block, connection method: Screw connection, cross section: 0.2 mm² - 4 mm², AWG: 24 - 12, width: 6.2 mm, color: gray, mounting type: NS 35/7,5,  NS 35/15

Preț:

Prezentare generală

Date tehnice

Accesorii

Aprobări

Descărcări

Caracteristici articol

  • Same shape as DIK ... three-level initiator terminal blocks
  • Terminal blocks with red and green LEDs are available for optical signaling of the initiator and actuator wiring
  • The forks of the insertion bridge can be easily loosened for bridging between non-adjacent terminal blocks
  • Alternate wiring of an actuator followed by an initiator is easy
  • The upper level contains the feed-through connections for the signal cable which can be labeled
  • Because the spine of the insertion bridge can be snapped into place with the terminal block housing, all the terminal points can be wired freely and the bridge can be securely positioned
  • Unlike the DIK terminal blocks, the lower level of these output terminal blocks makes direct contact with the DIN rail and as a PE connection are marked yellow-green
  • The middle level supplies the connected actuators with power

Date comerciale

Cod comandă 2717016
Unitate de ambalare 50 buc
Pagina de catalog Pagina 446 (C-1-2017)
GTIN 4017918062040
Greutate pe bucată (fără ambalaj) 15,777 g
Cod tarif vamal 85369010
Țara de origine PL (Poland)

PHOENIX CONTACT SRL

Floreasca Business Park
Calea Floreasca 169 A,
Corp A, Etaj 8,
București, România,
RO-014459
0040 21 350 88 12
0040 21 350 88 13
  • Creare PDF
  • Recomandare
  • Feedback

Acest website folosește cookie-uri. Prin continuarea vizualizării site-ului nostru acceptați politicile noastre referitoare la cookie-uri. Pentru mai multe informații citiți politica noastră de confidențialitate.

Închidere