PCB terminal block - MKDS 5/ 2-6,35 GY BD:44,40 Z1L - 1758962

The figure shows a 2-pos. version of the product

PCB terminal block, nominal current: 32 A, pitch: 6.35 mm, number of positions: 2, connection method: Screw connection with tension sleeve, mounting: Wave soldering, conductor/PCB connection direction: 0 °, color: gray

Preț:

Prezentare generală

Date tehnice

Aprobări

Descărcări

Desene



Diagram  

Diagram
Type: MKDS 5/2-6,35 and MKDS 5/3-6,35
Test following DIN EN 60512-5-2:2003-01
Reduction factor = 1
No. of positions: 5

Înapoi în sus

Item properties

Brief article description PCB terminal block
Range of articles MKDS 5
Pitch 6.35 mm
Number of positions 2
Connection method Screw connection with tension sleeve
Drive form screw head Slotted Pozidriv (Z1L)
Screw thread M3
Mounting type Wave soldering
Pin layout Linear pinning
Number of levels 1
Number of connections 2
Number of potentials 2
Înapoi în sus

Connection capacity

Conductor cross section solid 0.2 mm² ... 6 mm²
Conductor cross section flexible 0.2 mm² ... 4 mm²
Conductor cross section AWG / kcmil 24 ... 10
Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 4 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 4 mm²
2 conductors with same cross section, solid 0.2 mm² ... 1.5 mm²
2 conductors with same cross section, flexible 0.2 mm² ... 1.5 mm²
2 conductors with same cross section, stranded, ferrules without plastic sleeve 0.25 mm² ... 0.75 mm²
2 conductors with same cross section, stranded, with TWIN ferrules with plastic sleeve 0.5 mm² ... 2.5 mm²
Stripping length 8 mm
Torque 0.5 Nm ... 0.6 Nm
Înapoi în sus

Material data - contact

Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Contact material Cu alloy
Surface characteristics Tin-plated
Metal surface terminal point (top layer) Tin (4 - 8 µm Sn)
Metal surface soldering area (top layer) Tin (4 - 8 µm Sn)
Înapoi în sus

Material data - housing

Insulating material PA
Insulating material group I
CTI according to IEC 60112 600
Flammability rating according to UL 94 V0
Glow wire flammability index GWFI according to EN 60695-2-12 850
Glow wire ignition temperature GWIT according to EN 60695-2-13 775
Temperature for the ball pressure test according to EN 60695-10-2 125 °C
Înapoi în sus

Dimensions for the product

Dimensional drawing
Caption Schematic representation – for additional information, see product range drawing in the Download Center
Length [ l ] 12.5 mm
Width [ w ] 12.7 mm
Height [ h ] 26.6 mm
Pitch 6.35 mm
Height (without solder pin) 21.5 mm
Solder pin [P] 5.1 mm
Pin dimensions 0.9 x 0.9 mm
Dimension a 6.35 mm
Înapoi în sus

Dimensions for PCB design

Hole diameter 1.3 mm
Înapoi în sus

Packaging information

Type of packaging packed in cardboard
Pieces per package 50
Denomination packing units Pcs.
Înapoi în sus

General product information

Type of note Note on application
Note For safe conductor connection, always adhere to a defined tightening torque. Particularly in the case of PCB terminal blocks with two or three positions, the individual solder pin for each contact point cannot compensate for this. That is why the terminal blocks must be supported during conductor connection (held with one hand, support on the housing).
Înapoi în sus

Ambient conditions

Ambient temperature (storage/transport) -40 °C ... 70 °C
Ambient temperature (assembly) -5 °C ... 100 °C
Ambient temperature (operation) -40 °C ... 100 °C (Depending on the current carrying capacity/derating curve)
Înapoi în sus

Termination and connection method

Test for conductor damage and slackening IEC 60998-2-1:1990-04
Test passed
Înapoi în sus

Pull-out test

Pull-out test IEC 60998-2-1:1990-04
Test passed
Conductor cross section / conductor type / tensile force 0.2 mm² / solid / > 10 N
0.2 mm² / flexible / > 10 N
6 mm² / solid / > 80 N
4 mm² / flexible / > 60 N
Înapoi în sus

Electrical tests

Rated current 32 A
Conductor cross section 4 mm²
Rated voltage (III/2) 630 V
Rated surge voltage (III/2) 6 kV
Înapoi în sus

Air clearances and creepage distances

Rated insulation voltage (III/3) 500 V
Rated insulation voltage (III/2) 630 V
Rated insulation voltage (II/2) 1000 V
Rated surge voltage (III/3) 6 kV
Rated surge voltage (III/2) 6 kV
Rated surge voltage (II/2) 6 kV
Minimum clearance - inhomogeneous field (III/3) 5.5 mm
Minimum clearance - inhomogeneous field (III/2) 5.5 mm
Minimum clearance - inhomogeneous field (II/2) 5.5 mm
Minimum creepage distance value (III/3) 6.3 mm
Minimum creepage distance value (III/2) 5.5 mm
Minimum creepage distance value (II/2) 5.5 mm
Note on connection cross section With connected conductor 6 mm² (solid).
Înapoi în sus

Vibration test

Specification IEC 60068-2-6:1995-03
Result Test passed
Frequency 10 - 150 - 10 Hz
Sweep speed 1 octave/min
Amplitude 0.35 mm (10 - 60.1 Hz)
Acceleration 5 g (60.1 - 150 Hz)
Test duration per axis 2.5 h
Înapoi în sus

Resistance to ageing, humidity and penetration of solids

Dry heat 168 h/100°C
Humid heat 48 h/25 °C/92%
Înapoi în sus

Standards and Regulations

Connection in acc. with standard EN-VDE
CSA
Înapoi în sus

Environmental Product Compliance

REACh SVHC
Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Înapoi în sus

Clasificări

eCl@ss

eCl@ss 4.0 27141100
eCl@ss 4.1 27141100
eCl@ss 5.0 27141100
eCl@ss 5.1 27261100
eCl@ss 6.0 27261100
eCl@ss 7.0 27440401
eCl@ss 8.0 27440401
eCl@ss 9.0 27440401
Înapoi în sus

ETIM

ETIM 3.0 EC001121
ETIM 4.0 EC002643
ETIM 5.0 EC002643
ETIM 6.0 EC002643
ETIM 7.0 EC002643
Înapoi în sus

UNSPSC

UNSPSC 6.01 30211801
UNSPSC 7.0901 39121432
UNSPSC 11 39121432
UNSPSC 12.01 39121432
UNSPSC 13.2 39121432
Înapoi în sus

Service model

Acest articol nu este disponibil ca mostră de articol.

Service model

PHOENIX CONTACT ROMANIA

Splaiul Unirii 165
Timpuri Noi Square
TNO1, Etaj 1
Bucuresti 030133
+40 21 350 88 12 - 3
+40 37 448 56 32 - 7
  • Creare PDF
  • Recomandare
  • Feedback

Acest website folosește cookie-uri. Prin continuarea vizualizării site-ului nostru acceptați politicile noastre referitoare la cookie-uri. Pentru mai multe informații citiți politica noastră de confidențialitate.

Închidere