Distributed I/O device - AXL E EC DIO16 M12 6M - 2701528

Axioline E, Digital I/O device, EtherCAT®, M12 fast connection technology, Digital inputs: 16 , 24 V DC, connection method: 4-wire, Digital outputs: , 24 V DC, 500 mA, connection method: 3-wire, Metal housing, degree of protection: IP65/IP67

Preț:

Prezentare generală

Date tehnice

Accesorii

Aprobări

Descărcări

Desene



Connection diagram  

Connection diagram

Dimensional drawing  

Dimensional drawing



Înapoi în sus

Note

Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
Înapoi în sus

Dimensions

Dimensional drawing
Width 60 mm
Height 185 mm
Depth 38 mm
Note on dimensions The height is 194.5 mm including the mounting plate. With fixing clips pulled out, the height is 212 mm. The depth is 38 mm including the mounting plate (30.5 mm without the mounting plate).
Drill hole spacing 198.5 mm
Înapoi în sus

Ambient conditions

Ambient temperature (operation) -25 °C ... 60 °C
Ambient temperature (storage/transport) -25 °C ... 85 °C
Permissible humidity (operation) 5 % ... 95 %
Permissible humidity (storage/transport) 5 % ... 95 %
Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level)
Degree of protection IP65/IP67
Înapoi în sus

General

Housing material Zinc die-cast
Mounting type Wall mounting or DIN rail mounting; both with mounting plate.
Net weight 715.5 g
Înapoi în sus

Interfaces

Designation EtherCAT®
No. of channels 2
Connection method M12 fast connection technology
Note on the connection method D-coded
Designation connection point Copper cable
Transmission speed 100 Mbps (with auto negotiation)
Number of positions 4
Înapoi în sus

System limits of the bus coupler

Designation EtherCAT®
Equipment type EtherCAT® slave
System-specific protocols Mailbox protocols CANopen® over EtherCAT®
Mailbox protocols File access over EtherCAT®
Type of addressing Auto-increment addressing
Fixed position addressing
Logical addressing
Specification ETG.1000 V1.02
Înapoi în sus

Supply

Designation Actuators (UA) for additional devices
Connection method M12 connector (T-coded)
Number of positions 4
Supply voltage 24 V DC
Supply voltage range 18 V DC ... 31.2 V DC (including all tolerances, including ripple)
Current consumption typ. 3 mA ±15 % (at 24 V DC)
Înapoi în sus

Digital inputs

Input name Digital inputs
Description of the input EN 61131-2 types 1 and 3
Connection method M12 connector, double occupancy
Connection technology 4-wire
Number of inputs 16
Protective circuit Overload protection, short-circuit protection of sensor supply
Nominal input voltage UIN 24 V DC
Nominal input current at UIN typ. 3 mA
Input filter time < 1000 µs
Cable length max. 30 m (To the sensor)
Input voltage range "0" signal 0 V ... 5 V DC
Input voltage range "1" signal 11 V DC ... 30 V DC
Înapoi în sus

Digital outputs

Output name Digital outputs
Connection method M12 connector, double occupancy
Connection technology 3-wire
Number of outputs 16
Protective circuit Overload protection, short-circuit protection of outputs yes
Output voltage 24 V DC
Nominal output voltage 24 V DC (from voltage US)
Maximum output current per channel 500 mA
Nominal load, inductive 12 VA (1.2 H, 48 Ω, with nominal voltage)
Nominal load, ohmic 12 W (48 Ω, with nominal voltage)
Switching frequency max. 5500 per second (with at least 50 mA load current)
Output voltage when switched off max. 1 V
Output current when switched off max. 20 µA
Behavior with overload Auto restart
Reverse voltage resistance to short pulses Reverse voltage proof
Înapoi în sus

Electrical isolation

Test section 24 V supply (communications power/sensor supply, digital inputs/outputs)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
24 V supply (communications power/sensor supply, digital inputs/outputs)/bus connection (Ethernet 2) 500 V AC 50 Hz 1 min.
24 V supply (communications power/sensor supply, digital inputs/outputs)/FE 500 V AC 50 Hz 1 min.
Bus connection (Ethernet 1)/FE 500 V AC 50 Hz 1 min.
Bus connection (Ethernet 2)/FE 500 V AC 50 Hz 1 min.
Bus connection (Ethernet 1)/bus connection (Ethernet 2) 500 V AC 50 Hz 1 min.
24 V supply (actuator supply)/24 V supply (communications power and sensor supply, digital inputs/outputs) 500 V AC 50 Hz 1 min.
24 V supply (actuator supply)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
24 V supply (actuator supply)/bus connection (Ethernet 2) 500 V AC 50 Hz 1 min.
24 V supply (actuator supply)/FE 500 V AC 50 Hz 1 min.
Înapoi în sus

Standards and Regulations

Mechanical tests Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
Shock in acc. with EN 60068-2-27/IEC 60068-2-27 30g, 11 ms period, half-sine shock pulse
Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g
Protection class III (IEC 61140, EN 61140, VDE 0140-1)
Înapoi în sus

Environmental Product Compliance

China RoHS Environmentally Friendly Use Period = 25;
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Înapoi în sus

Clasificări

eCl@ss

eCl@ss 4.0 27240400
eCl@ss 4.1 27240400
eCl@ss 5.0 27242200
eCl@ss 5.1 27242600
eCl@ss 6.0 27242600
eCl@ss 7.0 27242604
eCl@ss 8.0 27242604
eCl@ss 9.0 27242604
Înapoi în sus

ETIM

ETIM 2.0 EC001433
ETIM 3.0 EC001599
ETIM 4.0 EC001599
ETIM 5.0 EC001599
ETIM 6.0 EC001599
ETIM 7.0 EC001599
Înapoi în sus

UNSPSC

UNSPSC 6.01 43172015
UNSPSC 7.0901 43201404
UNSPSC 11 39121311
UNSPSC 12.01 39121311
UNSPSC 13.2 32151602
Înapoi în sus

PHOENIX CONTACT ROMANIA

Splaiul Unirii 165
Timpuri Noi Square
TNO1, Etaj 1
Bucuresti 030133
+40 21 350 88 12 - 3
+40 37 448 56 32 - 7
  • Creare PDF
  • Recomandare
  • Feedback

Acest website folosește cookie-uri. Prin continuarea vizualizării site-ului nostru acceptați politicile noastre referitoare la cookie-uri. Pentru mai multe informații citiți politica noastră de confidențialitate.

Închidere