Inline function terminal - IB IL PB MA-PAC - 2700630

Inline PROFIBUS master/slave, for connecting a PROFIBUS system, complete with accessories (connector and marking field), use only with PC Worx

Preço:

Visão geral

Dados técnicos

Downloads

Descrição do artigo

The terminal is designed for use within an Inline station.
It can be used to integrate a lower-level PROFIBUS system into the Inline station and therefore into the bus system used.
Within the Inline station, the terminal acts as a PROFIBUS master for the lower-level PROFIBUS system or as a PROFIBUS slave for a higher-level PROFIBUS system.
As a PROFIBUS master, the terminal can be used to integrate standard-compliant PROFIBUS slaves into all INTERBUS or PROFINET-based controllers from Phoenix Contact.
As a PROFIBUS slave, the terminal can be used to integrate a Phoenix Contact controller into any PROFIBUS-based systems (gateway).
PROFIBUS features
- PROFIBUS master/slave
- Transmission speed: 12 Mbps, maximum
- Diagnostic and error messages are exchanged
Local bus features
- 500 kbps and 2 Mbps transmission speed (automatic detection)
- Maximum data width: 32 words
General features
- Serial interface with inserted memory stick for storing the configuration data
- DIP switch for setting the data width
- Direct PROFIBUS configuration in PC Worx
- Integration of process variables using the connection editor
- Integration of third-party devices using GSD

Vantagens para si

  • PROFIBUS connection via 9-pos. D-SUB socket
  • Operation as DP master or slave
  • PROFIBUS data transmission speed of 9.6 kbps to 12 Mbps
  • Size of PROFIBUS process image: up to 48 words of input and output data (a maximum of ten PROFIBUS slaves) or 56 words (a maximum of three PROFIBUS slaves)
  • Maximum of ten DP slaves supported when operated as the DP master
  • When operated as the DP slave: device description via GSD file, rotary encoding switch for setting the PROFIBUS address, support for PROFIBUS addresses 1 to 125
  • DIP switch for setting the operating mode, the startup behavior, the data width, and the transmission speed on the local bus
  • Diagnostic and status indicators
  • When operated as the DP master: the configuration data is stored on the memory stick
Logo

Dados comerciais

Chave de encomenda 2700630
Quantidade de embalagem 1 UNID
Página de catálogo Página 177 (C-6-2017)
GTIN (EAN) 4046356598958
Peso por unidade (exclusive embalagem) 142,000 g
Número do imposto alfandegário 85389091
País de origem DE (Alemanha)

Phoenix Contact S.A.

Sintra Business Park,
Edifício n°1
Zona Industrial da Abrunheira
2710-089 SINTRA

Horário: 9h -13h e 14h -18h
(+351) 21 911 2760
  • Criar PDF
  • Recomendar
  • Feedback

Este website usa cookies. Ao continuar a navegar, está a concordar com a nossa política de cookies. Saiba mais sobre a nossa política de privacidade.

Fechar