PCB terminal block - MKDS 5/ 2-7,62 GY Z1L - 1704095

The figure shows a 2-pos. version of the product

PCB terminal block, nominal current: 32 A, rated voltage (III/2): 630 V, nominal cross section: 4 mm², Number of potentials: 2, Number of rows: 1, Number of positions per row: 2, product range: MKDS 5, pitch: 7.62 mm, connection method: Screw connection with tension sleeve, mounting: Wave soldering, conductor/PCB connection direction: 0 °, color: gray, Pin layout: Linear pinning, Solder pin [P]: 5.1 mm, type of packaging: packed in cardboard

Preço:

Visão geral

Dados técnicos

Certificações

Downloads

Desenhos



Diagram  

Diagram
Type: MKDS 5/...-7,62
Test according to DIN EN 60947-7-4 (VDE 0611-7-4):2014-08
Illustration according to DIN EN 60512-5-2:2003-01
Reduction factor = 1
Number of positions: 4

Voltar para cima

Item properties

Brief article description PCB terminal block
Range of articles MKDS 5
Pitch 7.62 mm
Number of positions 2
Drive form screw head Slotted Pozidriv (Z1L)
Screw thread M3
Mounting type Wave soldering
Pin layout Linear pinning
Number of levels 1
Number of connections 2
Number of potentials 2
Voltar para cima

Electrical parameters

Nominal current 32 A
Nom. voltage 630 V
Rated voltage (III/3) 500 V
Rated voltage (III/2) 630 V
Rated voltage (II/2) 1000 V
Rated surge voltage (III/3) 6 kV
Rated surge voltage (III/2) 6 kV
Rated surge voltage (II/2) 6 kV
Voltar para cima

Connection capacity

Connection method Screw connection with tension sleeve
pluggable Yes
Conductor cross section solid 0.2 mm² ... 6 mm²
Conductor cross section flexible 0.2 mm² ... 4 mm²
Conductor cross section AWG / kcmil 24 ... 10
Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 4 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 4 mm²
2 conductors with same cross section, solid 0.2 mm² ... 1.5 mm²
2 conductors with same cross section, flexible 0.2 mm² ... 1.5 mm²
2 conductors with same cross section, flexible, with ferrule without plastic sleeve 0.25 mm² ... 0.75 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve 0.5 mm² ... 2.5 mm²
Stripping length 8 mm
Torque 0.5 Nm ... 0.6 Nm
Voltar para cima

Material data - contact

Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Contact material Cu alloy
Surface characteristics Tin-plated
Metal surface terminal point (top layer) Tin (4 - 8 µm Sn)
Metal surface soldering area (top layer) Tin (4 - 8 µm Sn)
Voltar para cima

Material data - housing

Housing color gray (7042)
Insulating material PA
Insulating material group I
CTI according to IEC 60112 600
Flammability rating according to UL 94 V0
Glow wire flammability index GWFI according to EN 60695-2-12 850
Glow wire ignition temperature GWIT according to EN 60695-2-13 775
Temperature for the ball pressure test according to EN 60695-10-2 125 °C
Voltar para cima

Dimensions for the product

Dimensional drawing
Caption Schematische Abbildung - weitere Details siehe Produktfamilienzeichnung im Download Center
Length [ l ] 19.05 mm
Width [ w ] 15.24 mm
Height [ h ] 21.5 mm
Pitch 7.62 mm
Height (without solder pin) 22 mm
Solder pin [P] 5.1 mm
Pin dimensions 0.9 x 0.9 mm
Voltar para cima

Dimensions for PCB design

Hole diameter 1.3 mm
Voltar para cima

Packaging information

Type of packaging packed in cardboard
Pieces per package 50
Denomination packing units Pcs.
Voltar para cima

General product information

Type of note Note on application
Note For safe conductor connection, always adhere to a defined tightening torque. Particularly in the case of PCB terminal blocks with two or three positions, the individual solder pin for each contact point cannot compensate for this. That is why the terminal blocks must be supported during conductor connection (held with one hand, support on the housing).
Voltar para cima

Ambient conditions

Ambient temperature (storage/transport) -40 °C ... 70 °C
Ambient temperature (assembly) -5 °C ... 100 °C
Ambient temperature (operation) -40 °C ... 100 °C (Depending on the current carrying capacity/derating curve)
Voltar para cima

Termination and connection method

Test for conductor damage and slackening IEC 60998-2-1:1990-04
Test passed
Voltar para cima

Pull-out test

Pull-out test IEC 60998-2-1:1990-04
Conductor cross section / conductor type / tensile force 0.2 mm² / solid / > 10 N
0.2 mm² / flexible / > 10 N
6 mm² / solid / > 80 N
4 mm² / flexible / > 60 N
Voltar para cima

Mechanical tests according to standard

Test specification IEC 60998-2-1 (in parts)
Voltar para cima

Electrical tests

Rated current 32 A
Conductor cross section 4 mm²
Rated voltage (III/2) 630 V
Rated surge voltage (III/2) 6 kV
Voltar para cima

Air clearances and creepage distances

Clearances and creepage distances IEC 60664-1:2007-04
Specification IEC 60664-1:2007-04
Minimum clearance - inhomogeneous field (III/3) 5.5 mm
Minimum clearance - inhomogeneous field (III/2) 5.5 mm
Minimum clearance - inhomogeneous field (II/2) 5.5 mm
Minimum creepage distance value (III/3) 6.3 mm
Minimum creepage distance value (III/2) 3.2 mm
Minimum creepage distance value (II/2) 3.2 mm
Voltar para cima

Temperature-rise test

Specification IEC 60998-2-1:1990-04
Requirement temperature-rise test Increase in temperature ≤ 45 K
Voltar para cima

Current carrying capacity / derating curves

Diagram
Caption Type: MKDS 5/...-7,62
Test according to DIN EN 60947-7-4 (VDE 0611-7-4):2014-08
Illustration according to DIN EN 60512-5-2:2003-01
Reduction factor = 1
Number of positions: 4
Voltar para cima

Vibration test

Specification IEC 60068-2-6:1995-03
Frequency 10 - 150 - 10 Hz
Sweep speed 1 octave/min
Amplitude 0.35 mm (10 - 60.1 Hz)
Acceleration 5 g (60.1 - 150 Hz)
Test duration per axis 2.5 h
Voltar para cima

Insulation resistance

Specification IEC 60998-2-1:1990-04
Result Test passed
Insulation resistance, neighboring positions 109 Ω
Voltar para cima

Glow-wire test

Specification IEC 60998-2-1:1990-04
Temperature 850 °C
Time of exposure 5 s
Voltar para cima

Mechanical strength/tumbling barrel test

Specification IEC 60998-2-1:1990-04
Number of drop cycles 50
Voltar para cima

Standards and Regulations

Connection in acc. with standard EN-VDE
CUL
Voltar para cima

Environmental Product Compliance

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Voltar para cima

Classificações

eCl@ss

eCl@ss 10.0.1 27440401
eCl@ss 11.0 27460101
eCl@ss 4.0 27141109
eCl@ss 4.1 27141109
eCl@ss 5.0 27141190
eCl@ss 5.1 27261100
eCl@ss 6.0 27261100
eCl@ss 7.0 27440401
eCl@ss 8.0 27440401
eCl@ss 9.0 27440401
Voltar para cima

ETIM

ETIM 3.0 EC001121
ETIM 4.0 EC002637
ETIM 5.0 EC002643
ETIM 6.0 EC002643
ETIM 7.0 EC002643
Voltar para cima

UNSPSC

UNSPSC 6.01 30211801
UNSPSC 7.0901 39121432
UNSPSC 11 39121432
UNSPSC 12.01 39121432
UNSPSC 13.2 39121432
UNSPSC 18.0 39121432
UNSPSC 19.0 39121432
UNSPSC 20.0 39121432
UNSPSC 21.0 39121432
Voltar para cima

Serviço de amostras

Este artigo não se encontra disponível como artigo de amostra.

Serviço de amostras

Phoenix Contact S.A.

Sintra Business Park,
Edifício n°1
Zona Industrial da Abrunheira
2710-089 SINTRA

Horário: 9h -13h e 14h -18h
(+351) 21 911 2760

Serviço

HIGHLIGHTS 2020

Creative solutions for a smart world

  • Criar PDF
  • Recomendar
  • Feedback