Produtos A-Z

Feed-through plug - DFK-IPC 16/ 2-STF-10,16 - 1703771

The figure shows a 5-pos. version of the product

Feed-through connector, nominal cross section: 16 mm², color: green, nominal current: 76 A, rated voltage (III/2): 1000 V, contact surface: Silver, type of contact: Female connector, Number of potentials: 2, Number of rows: 1, Number of positions per row: 2, number of connections: 2, product range: DFK-IPC 16/..-STF, pitch: 10.16 mm, connection method: Screw connection with tension sleeve, conductor/PCB connection direction: 0 °, plug-in system: POWER COMBICON 16, Locking: Screw locking, type of packaging: packed in cardboard

Preço:

Visão geral

Dados técnicos

Acessórios

Certificações

Downloads

Desenhos

Diagram  

Diagram
Derating curve for: IPC 16/...-ST-10.16 with DFK-IPC 16/...-ST-10.16
Dimensional drawing  

Dimensional drawing
Dimensional drawing  

Dimensional drawing
Sheet metal cutout for snap-on.
Dimensional drawing  

Dimensional drawing
Sheet metal cutout for screw connection.
Voltar para cima

Item properties

Brief article description Feed-through plug
Plug-in system POWER COMBICON 16
Type of contact Female connector
Range of articles DFK-IPC 16/..-STF
Pitch 10.16 mm
Number of positions 2
Drive form screw head Slotted
Screw thread M4
Locking Screw flange
Number of levels 1
Number of connections 2
Number of potentials 2
Pin connector pattern alignment Standard
Voltar para cima

Electrical parameters

Nominal current 76 A
Nom. voltage 1000 V
Rated voltage (III/3) 1000 V
Rated voltage (III/2) 1000 V
Rated voltage (II/2) 1000 V
Rated surge voltage (III/3) 8 kV
Rated surge voltage (III/2) 8 kV
Rated surge voltage (II/2) 6 kV
Voltar para cima

Connection capacity

Connection method Screw connection with tension sleeve
pluggable Yes
Conductor cross section solid 0.75 mm² ... 16 mm²
Conductor cross section flexible 0.75 mm² ... 16 mm²
Conductor cross section AWG / kcmil 18 ... 6
Conductor cross section flexible, with ferrule without plastic sleeve 0.5 mm² ... 16 mm² (Only in connection with CRIMPFOX 16 S)
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.5 mm² ... 16 mm² (Only in connection with CRIMPFOX 16 S)
2 conductors with same cross section, solid 0.75 mm² ... 6 mm²
2 conductors with same cross section, flexible 0.75 mm² ... 6 mm²
2 conductors with same cross section, flexible, with ferrule without plastic sleeve 0.5 mm² ... 4 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve 0.5 mm² ... 6 mm²
Stripping length 12 mm
Torque 1.7 Nm ... 1.8 Nm
Voltar para cima

Flange specifications

Type of locking Screw locking
Mounting flange Screw flange
Voltar para cima

Material data - contact

Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Contact material Cu alloy
Surface characteristics Electroplated silver
Metal surface terminal point (top layer) Tin (4 - 8 µm Sn)
Metal surface contact area (top layer) Silver (2 - 4 µm Ag)
Voltar para cima

Material data - housing

Housing color green (6021)
Insulating material PA
Insulating material group I
CTI according to IEC 60112 600
Flammability rating according to UL 94 V0
Glow wire flammability index GWFI according to EN 60695-2-12 850
Glow wire ignition temperature GWIT according to EN 60695-2-13 775
Temperature for the ball pressure test according to EN 60695-10-2 125 °C
Voltar para cima

Dimensions for the product

Dimensional drawing
Caption Schematische Abbildung - weitere Details siehe Produktfamilienzeichnung im Download Center
Length [ l ] 56.4 mm
Width [ w ] 61.4 mm
Height [ h ] 32.05 mm
Pitch 10.16 mm
Voltar para cima

Packaging information

Type of packaging packed in cardboard
Pieces per package 10
Denomination packing units Pcs.
Voltar para cima

General product information

Type of note Notes on operation
Note In accordance with IEC 61984, COMBICON connectors have no switching power (COC). During designated use, they must not be plugged in or disconnected when carrying voltage or under load.
Voltar para cima

Air clearances and creepage distances

Clearances and creepage distances IEC 60664-1:2007-04
Specification IEC 60664-1:2007-04
Minimum clearance - inhomogeneous field (III/3) 8 mm
Minimum clearance - inhomogeneous field (III/2) 8 mm
Minimum clearance - inhomogeneous field (II/2) 5.5 mm
Minimum creepage distance value (III/3) 12.5 mm
Minimum creepage distance value (III/2) 5 mm
Minimum creepage distance value (II/2) 5 mm
Voltar para cima

Environmental Product Compliance

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Voltar para cima

Classificações

eCl@ss

eCl@ss 10.0.1 27440309
eCl@ss 11.0 27460202
eCl@ss 4.0 27260700
eCl@ss 4.1 27260700
eCl@ss 5.0 27141100
eCl@ss 5.1 27141100
eCl@ss 6.0 27141100
eCl@ss 7.0 27141134
eCl@ss 8.0 27440309
eCl@ss 9.0 27440309
Voltar para cima

ETIM

ETIM 3.0 EC001121
ETIM 4.0 EC002638
ETIM 5.0 EC002638
ETIM 6.0 EC002638
ETIM 7.0 EC002638
Voltar para cima

UNSPSC

UNSPSC 6.01 30211810
UNSPSC 7.0901 39121409
UNSPSC 11 39121409
UNSPSC 12.01 39121409
UNSPSC 13.2 39121410
UNSPSC 18.0 39121409
UNSPSC 19.0 39121409
UNSPSC 20.0 39121409
UNSPSC 21.0 39121409
Voltar para cima

Serviço de amostras

Este artigo não se encontra disponível como artigo de amostra.

Serviço de amostras

Phoenix Contact S.A.

Sintra Business Park,
Edifício n°1
Zona Industrial da Abrunheira
2710-089 SINTRA

Horário: 9h -13h e 14h -18h
(+351) 21 911 2760
  • Criar PDF
  • Recomendar
  • Feedback