PCB terminal block - MKDSFW 1,5/ 2-3,5 BD:-42+41 - 1703620

The figure shows a 10-position version of the product

PCB terminal block, nominal current: 12 A, rated voltage (III/2): 160 V, nominal cross section: 1.5 mm², Number of potentials: 2, Number of rows: 1, Number of positions per row: 2, product range: MKDSFW 1,5, pitch: 3.5 mm, connection method: Screw connection with tension sleeve, mounting: Wave soldering, conductor/PCB connection direction: 90 °, color: green, Pin layout: Linear pinning, Solder pin [P]: 3.5 mm, type of packaging: packed in cardboard

Preço:

Visão geral

Dados técnicos

Downloads

Item properties

Brief article description PCB terminal block
Range of articles MKDSFW 1,5
Pitch 3.5 mm
Number of positions 2
Drive form screw head Slotted (L)
Screw thread M2
Mounting type Wave soldering
Pin layout Linear pinning
Number of levels 1
Number of connections 2
Number of potentials 2
Voltar para cima

Electrical parameters

Nominal current 12 A
Nom. voltage 160 V
Rated voltage 160 V
Rated voltage (III/2) 160 V
Rated voltage (II/2) 320 V
Rated surge voltage (III/3) 2.5 kV
Rated surge voltage (III/2) 2.5 kV
Rated surge voltage (II/2) 2.5 kV
Voltar para cima

Connection capacity

Connection method Screw connection with tension sleeve
pluggable no
Conductor cross section solid 0.14 mm² ... 1.5 mm²
Conductor cross section flexible 0.14 mm² ... 1.5 mm²
Conductor cross section AWG / kcmil 26 ... 16
Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 1.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 1.5 mm²
2 conductors with same cross section, solid 0.14 mm² ... 0.75 mm²
2 conductors with same cross section, flexible 0.14 mm² ... 0.75 mm²
2 conductors with same cross section, flexible, with ferrule without plastic sleeve 0.25 mm² ... 0.5 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve 0.5 mm² ... 1 mm²
Stripping length 6 mm
Torque 0.22 Nm ... 0.25 Nm
Voltar para cima

Material data - contact

Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Contact material Cu alloy
Metal surface terminal point (top layer) Tin (5 - 7 µm Sn)
Metal surface terminal point (middle layer) Nickel (2 - 3 µm Ni)
Metal surface soldering area (top layer) Tin (5 - 7 µm Sn)
Metal surface soldering area (middle layer) Nickel (2 - 3 µm Ni)
Voltar para cima

Material data - housing

Housing color green (6021)
Insulating material PA
Insulating material group I
CTI according to IEC 60112 600
Flammability rating according to UL 94 V0
Glow wire flammability index GWFI according to EN 60695-2-12 850
Glow wire ignition temperature GWIT according to EN 60695-2-13 775
Temperature for the ball pressure test according to EN 60695-10-2 125 °C
Voltar para cima

Dimensions for the product

Dimensional drawing
Caption Schematische Abbildung - weitere Details siehe Produktfamilienzeichnung im Download Center
Length [ l ] 11.3 mm
Width [ w ] 8.3 mm
Height [ h ] 13.9 mm
Pitch 3.5 mm
Height (without solder pin) 10.4 mm
Solder pin [P] 3.5 mm
Pin dimensions 0.5 x 0.9 mm
Voltar para cima

Dimensions for PCB design

Hole diameter 1.3 mm
Voltar para cima

Packaging information

Type of packaging packed in cardboard
Pieces per package 50
Denomination packing units Pcs.
Voltar para cima

General product information

Type of note Note on application
Note For safe conductor connection, always adhere to a defined tightening torque. Particularly in the case of PCB terminal blocks with two or three positions, the individual solder pin for each contact point cannot compensate for this. That is why the terminal blocks must be supported during conductor connection (held with one hand, support on the housing).
Voltar para cima

Electrical tests

Rated current 12 A
Conductor cross section 1.5 mm²
Rated voltage (III/2) 160 V
Rated surge voltage (III/2) 2.5 kV
Voltar para cima

Standards and Regulations

Connection in acc. with standard EN-VDE
CUL
Voltar para cima

Environmental Product Compliance

China RoHS Environmentally Friendly Use Period = 50 years
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Voltar para cima

Classificações

eCl@ss

eCl@ss 4.0 27141109
eCl@ss 4.1 27141109
eCl@ss 5.0 27141190
eCl@ss 5.1 27261100
eCl@ss 6.0 27261100
eCl@ss 7.0 27440401
eCl@ss 8.0 27440401
eCl@ss 9.0 27440401
Voltar para cima

ETIM

ETIM 3.0 EC001121
ETIM 4.0 EC002643
ETIM 5.0 EC002643
ETIM 6.0 EC002643
ETIM 7.0 EC002643
Voltar para cima

UNSPSC

UNSPSC 6.01 30211801
UNSPSC 7.0901 39121432
UNSPSC 11 39121432
UNSPSC 12.01 39121432
UNSPSC 13.2 39121432
UNSPSC 19.0 39121432
Voltar para cima

Serviço de amostras

Este artigo não se encontra disponível como artigo de amostra.

Serviço de amostras

Phoenix Contact S.A.

Sintra Business Park,
Edifício n°1
Zona Industrial da Abrunheira
2710-089 SINTRA

Horário: 9h -13h e 14h -18h
(+351) 21 911 2760

Serviço

HIGHLIGHTS 2020

Creative solutions for a smart world

  • Criar PDF
  • Recomendar
  • Feedback