Printed-circuit board connector - PC 5/ 3-G-7,62 BK P26 - 1703546

The figure shows a 5-pos. version of the product in green

PCB header, nominal cross section: 6 mm², color: black, nominal current: 41 A, rated voltage (III/2): 630 V, contact surface: Tin, type of contact: Male connector, Number of rows: 1, Number of positions per row: 3, product range: PC 5/..-G, pitch: 7.62 mm, mounting: Wave soldering, pin layout: Linear three-way pinning, solder pin [P]: 2.6 mm, plug-in system: POWER COMBICON 5, Locking: without, type of packaging: packed in cardboard

Preço:

Visão geral

Dados técnicos

Certificações

Downloads

Desenhos



Diagram  

Diagram
Derating curve for: PC 5/...-ST1-7,62 with PC 5/...-G-7,62
Conductor cross section: 10 mm²

Diagram  

Diagram
Derating curve for: PC 5/...-ST1-7,62 with PC 5/...-G-7,62
Conductor cross section: 6 mm²



Diagram  

Diagram
Derating curve for: SPC 5/...-ST-7,62 with PC 5/...-G-7,62

Diagram  

Diagram
Type: PC 4/...-ST-7,62 with PC 5/...-G-7,62



Diagram  

Diagram
Type: TSPC 5/...-ST-7,62 with PC 5/...-G-7,62

Voltar para cima

Item properties

Brief article description Feed-through header
Plug-in system POWER COMBICON 5
Type of contact Male connector
Range of articles PC 5/..-G
Pitch 7.62 mm
Number of positions 3
Mounting type Wave soldering
Pin layout Linear three-way pinning
Locking without
Number of levels 1
Pin connector pattern alignment Standard
Voltar para cima

Electrical parameters

Nominal current 41 A
Nom. voltage 630 V
Rated voltage (III/3) 630 V
Rated voltage (III/2) 630 V
Rated voltage (II/2) 1000 V
Rated surge voltage (III/3) 6 kV
Rated surge voltage (III/2) 6 kV
Rated surge voltage (II/2) 6 kV
Voltar para cima

Material data - contact

Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Contact material Cu alloy
Surface characteristics hot-dip tin-plated
Metal surface contact area (top layer) Tin (4 - 8 µm Sn)
Metal surface soldering area (top layer) Tin (4 - 8 µm Sn)
Voltar para cima

Material data - housing

Housing color black (9005)
Insulating material PA
Insulating material group I
CTI according to IEC 60112 600
Flammability rating according to UL 94 V0
Glow wire flammability index GWFI according to EN 60695-2-12 850
Glow wire ignition temperature GWIT according to EN 60695-2-13 775
Temperature for the ball pressure test according to EN 60695-10-2 125 °C
Voltar para cima

Flange specifications

Type of locking without
Mounting flange without
Voltar para cima

Dimensions for the product

Dimensional drawing
Caption Schematische Abbildung - weitere Details siehe Produktfamilienzeichnung im Download Center
Length [ l ] 29.25 mm
Width [ w ] 25.66 mm
Height [ h ] 16.89 mm
Pitch 7.62 mm
Height (without solder pin) 14.29 mm
Solder pin [P] 2.6 mm
Pin dimensions 0.8 x 1 mm
Voltar para cima

Dimensions for PCB design

Hole diameter 1.3 mm
Voltar para cima

Packaging information

Type of packaging packed in cardboard
Pieces per package 50
Denomination packing units Pcs.
Voltar para cima

General product information

Type of note Notes on operation
Note In accordance with IEC 61984, COMBICON connectors have no switching power (COC). During designated use, they must not be plugged in or disconnected when carrying voltage or under load.
Voltar para cima

Ambient conditions

Ambient temperature (storage/transport) -40 °C ... 70 °C
Ambient temperature (assembly) -5 °C ... 100 °C
Ambient temperature (operation) -40 °C ... 100 °C (dependent on the derating curve)
Voltar para cima

Air clearances and creepage distances

Clearances and creepage distances IEC 60664-1:2007-04
Specification IEC 60664-1:2007-04
Minimum clearance - inhomogeneous field (III/3) 5.5 mm
Minimum clearance - inhomogeneous field (III/2) 5.5 mm
Minimum clearance - inhomogeneous field (II/2) 5.5 mm
Minimum creepage distance value (III/3) 8 mm
Minimum creepage distance value (III/2) 5.5 mm
Minimum creepage distance value (II/2) 5.5 mm
Voltar para cima

Mechanical tests (A)

Test specification IEC 61984
Insertion strength per pos. approx. 8 N
Withdraw strength per pos. approx. 6.5 N
Polarization when inserted requirement >20 N Test passed
Contact holder in insert requirements >20 N Test passed
Voltar para cima

Durability tests (B)

Specification IEC 60512-5:1992-08
Contact resistance R1 0.4 mΩ
Insertion/withdrawal cycles 50
Contact resistance R2 0.5 mΩ
Impulse withstand voltage at sea level 7.3 kV
Voltar para cima

Thermal tests (C)

Specification IEC 60512-5-1:2002-02
Number of positions 12
Upper limiting temperature requirements <100 °C Test passed
Voltar para cima

Climatic tests (D)

Specification ISO 6988:1985-02
Cold stress -40 °C/2 h
Thermal stress 100 °C/168 h
Corrosive stress 0.2 dm3 SO2 on 300 dm3/40 °C/1 cycle
Impulse withstand voltage at sea level 7.3 kV
Power-frequency withstand voltage 3.31 kV
Voltar para cima

Environmental and durability tests (E)

Specification IEC 61984:2008-10
Result, degree of protection, IP code Back of hand safety with IP10 access probe
Voltar para cima

Vibration test

Specification IEC 60068-2-6:2007-12
Frequency 10 - 150 - 10 Hz
Sweep speed 1 octave/min
Amplitude 0.35 mm (10 - 60.1 Hz)
Acceleration 5 g (60.1 - 150 Hz)
Test duration per axis 2.5 h
Voltar para cima

Standards and Regulations

Connection in acc. with standard EN-VDE
Flammability rating according to UL 94 V0
Voltar para cima

Environmental Product Compliance

China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Voltar para cima

Classificações

eCl@ss

eCl@ss 10.0.1 27440402
eCl@ss 11.0 27460201
eCl@ss 4.0 27260700
eCl@ss 4.1 27260700
eCl@ss 5.0 27260700
eCl@ss 5.1 27260700
eCl@ss 6.0 27260700
eCl@ss 7.0 27440402
eCl@ss 8.0 27440402
eCl@ss 9.0 27440402
Voltar para cima

ETIM

ETIM 4.0 EC002637
ETIM 5.0 EC002637
ETIM 6.0 EC002637
ETIM 7.0 EC002637
Voltar para cima

UNSPSC

UNSPSC 6.01 30211810
UNSPSC 7.0901 39121409
UNSPSC 11 39121409
UNSPSC 12.01 39121409
UNSPSC 13.2 39121409
UNSPSC 18.0 39121409
UNSPSC 19.0 39121409
UNSPSC 20.0 39121409
UNSPSC 21.0 39121409
Voltar para cima

Serviço de amostras

Este artigo não se encontra disponível como artigo de amostra.

Serviço de amostras

Phoenix Contact S.A.

Sintra Business Park,
Edifício n°1
Zona Industrial da Abrunheira
2710-089 SINTRA

Horário: 9h -13h e 14h -18h
(+351) 21 911 2760

Serviço

HIGHLIGHTS 2020

Creative solutions for a smart world

  • Criar PDF
  • Recomendar
  • Feedback