Repeater - PSI-REP-DNET CAN - 2313423

Modular repeater for electrical isolation and increasing the range for DeviceNet/SDS/CANopen, data rate of up to 1 Mbps. High-quality electrical isolation between the interfaces, DIN-rail mountable, 24 V DC supply.

Price:

Overview

Technical data

Accessories

Approvals

Downloads

Drawings



Application drawing  

Application drawing
Branch line

Application drawing  

Application drawing
Star structure



Application drawing  

Application drawing
Tree structure

Application drawing  

Application drawing
Line structure



Block diagram  

Block diagram

Dimensional drawing  

Dimensional drawing



Schematic diagram  

Schematic diagram
DIP switches

Schematic diagram  

Schematic diagram
Device connections



Schematic diagram  

Schematic diagram
Front view

Back to top

Note

Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
Back to top

Dimensions

Dimensional drawing
Width 35 mm
Height 111 mm
Depth 121 mm
Back to top

Ambient conditions

Ambient temperature (operation) -20 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Permissible humidity (operation) 30 % ... 95 % (non-condensing)
Altitude 5000 m (For restrictions see manufacturer's declaration)
Degree of protection IP20
Noise immunity EN 61000-6-2
Back to top

Serial interface

Interface 1 CAN interface, in accordance with ISO/IS 11898 for DeviceNet, CAN, CANopen
Operating mode Semi-duplex
No. of ports 2 (CAN_High / CAN_Low)
Connection method COMBICON plug-in screw terminal block
File format/coding Bit stuffing, NRZ
Transmission medium 2-wire twisted pair, shielded
Transmission method CSMA/CA
Transmission length ≤ 5000 m (Dependent on the data rate and the protocol used)
Number of bus devices ≤ 64 (per potential segment)
≤ 63 (DeviceNet™, can be addressed logically)
≤ 128 (CANopen®, can be addressed logically)
Termination resistor 124 Ω (Integrated and ready to be switched)
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 14
Interface 2 CAN interface, in accordance with ISO/IS 11898 for DeviceNet, CAN, CANopen
Operating mode Semi-duplex
No. of ports 2 (CAN_High / CAN_Low)
Connection method COMBICON plug-in screw terminal block
File format/coding Bit stuffing, NRZ
Transmission medium 2-wire twisted pair, shielded
Transmission method CSMA/CA
Transmission length ≤ 5000 m (Dependent on the data rate and the protocol used)
Number of bus devices ≤ 64 (per potential segment)
≤ 63 (DeviceNet™, can be addressed logically)
≤ 128 (CANopen®, can be addressed logically)
Termination resistor 124 Ω (Integrated and ready to be switched)
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 14
Back to top

Digital outputs

Output name Relay output
Number of outputs 1
Contact type N/O contact
Minimum switching voltage 10 V DC
Maximum switching voltage 30 V DC
Limiting continuous current 500 mA
Back to top

Power supply

Nominal supply voltage 24 V DC
Supply voltage range 10 V DC ... 30 V DC (via pluggable COMBICON screw terminal block)
Max. current consumption 80 mA
Typical current consumption 55 mA (24 V DC)
Back to top

General

Bit delay One telegram length (EXTENDED)
Bit distortion, input ± 35 %
Bit distortion, output < 6.25 %
Electrical isolation according to EN 60950
VCC // TBUS // CAN A // CAN B
Test voltage data interface/power supply 1.5 kVrms (50 Hz, 1 min.)
Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
Noise emission EN 55011
Net weight 238.5 g
Housing material PA 6.6-FR
Color green
MTBF 823 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
170 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle (5 days a week, 12 hours a day))
MTTF 1091 Years (SN 29500 standard, temperature 25 °C, operating cycle 21 % (5 days a week, 8 hours a day))
514 Years (SN 29500 standard, temperature 40 °C, operating cycle 34.25 % (5 days a week, 12 hours a day))
208 Years (SN 29500 standard, temperature 40 °C, operating cycle 100 % (7 days a week, 24 hours a day))
Conformance CE-compliant
ATEX  II 3 G Ex nA IIC T4 Gc X (Please follow the special installation instructions in the documentation!)
UL, USA/Canada 508 Listed
Back to top

Standards and Regulations

Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
Type of test Free fall in acc. with IEC 60068-2-32
Test result 1 m
Type of test Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6
Test result 5g, 10...150 Hz, 2.5 h, in XYZ direction
Type of test Shock in acc. with EN 60068-2-27/IEC 60068-2-27
Test result 15g, 11 ms period, half-sine shock pulse
Noise emission EN 55011
Noise immunity EN 61000-6-2
Free from substances that could impair the application of coating according to P-VW 3.10.7 57 65 0 VW-AUDI-Seat central standard
Standards/regulations EN 61000-4-2
Contact discharge ± 6 kV
Standards/regulations EN 61000-4-3
Frequency range 80 MHz ... 3 GHz
Standards/regulations EN 61000-4-4
Comments Criterion B
Standards/regulations EN 61000-4-5
Signal ± 1 kV
Standards/regulations EN 55011
EN 61000-4-6
Designation Air clearances and creepage distances
Standards/regulations DIN EN 50178, DIN EN 60950
Electrical isolation according to EN 60950
Conformance CE-compliant
ATEX  II 3 G Ex nA IIC T4 Gc X
UL, USA/Canada 508 Listed
Shipbuilding approval DNV GL
DNV GL-Temperature B
DNV GL-Humidity A
DNV GL-Vibration A
DNV GL-EMC B
DNV GL-Enclosure Required protection according to the Rules shall be provided upon installation on board
Noxious gas test ISA-S71.04-1985 G3 Harsh Group A
Back to top

Environmental Product Compliance

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Back to top

Classifications

eCl@ss

eCl@ss 4.0 27240490
eCl@ss 4.1 27240490
eCl@ss 5.0 27242208
eCl@ss 5.1 27242700
eCl@ss 6.0 27242200
eCl@ss 7.0 27242208
eCl@ss 8.0 27242208
eCl@ss 9.0 27242208
Back to top

ETIM

ETIM 3.0 EC000698
ETIM 4.0 EC001423
ETIM 5.0 EC001423
ETIM 6.0 EC001423
ETIM 7.0 EC001423
Back to top

UNSPSC

UNSPSC 6.01 30211506
UNSPSC 7.0901 39121008
UNSPSC 11 39121008
UNSPSC 12.01 39121008
UNSPSC 13.2 39122114
Back to top

PHOENIX CONTACT Ltd

Unit 15C, 906-930 Great South Road, Penrose
Auckland 1061
New Zealand

Phone: 0508 474 636
Toll Free (Local)
09 950 8495
  • Create PDF
  • Recommend
  • Feedback

This website uses cookies, by continuing to browse, you agree to our cookie policy. Read our privacy policy for more information.

Close