Monitoring relay - EMD-SL-PH-400 - 2866077

Monitoring relay for monitoring phase sequence, phase failure and asymmetry, 342 ... 457 V AC, supply from measurement supply, 2 PDTs

Price:

Overview

Technical data

Approvals

Downloads

Drawings



Block diagram  

Block diagram

Back to top

Dimensions

Width 22.5 mm
Height 90 mm
Depth 113 mm
Back to top

Ambient conditions

Ambient temperature (operation) -25 °C ... 55 °C
-25 °C ... 40 °C (corresponds to UL 508)
Ambient temperature (storage/transport) -25 °C ... 70 °C
Permissible humidity (operation) 15 % ... 85 %
Degree of protection IP40 (Housing)
IP20 (Connection terminal blocks)
Noise immunity EN 61000-6-2
Back to top

Input data

Nominal input voltage UN 400 V (3 N ~ 400/230 V)
Function Phase sequence, phase failure, asymmetry
Min setting range of the voltage threshold value 342 V AC
Max. setting range of the voltage threshold value 457 V AC
Setting range for response delay ≤ 350 ms (fixed setting)
Setting range for starting delay ≤ 500 ms (fixed setting)
Asymmetry Fixed, approx. 30 %
Recovery time < 100 ms
Back to top

Contact side

Contact type 2 floating PDT contacts
Maximum switching voltage 250 V AC (in acc. with IEC 60664-1)
Interrupting rating (ohmic load) max. 750 VA (3 A/250 V AC, module aligned, ≤ 5 mm spacing)
1250 VA (5 A/250 V AC, module not aligned, ≥ 5 mm spacing)
Output fuse 5 A (fast-blow)
Back to top

Power supply

Supply voltage From the measured voltage
Back to top

General

Mechanical service life approx. 2x 107 cycles
Operating mode 100% operating factor
Mounting position any
Assembly instructions on standard DIN rail NS 35 in accordance with EN 60715
Electromagnetic compatibility Conformance with EMC directive
Housing insulation material Polyamide PA, self-extinguishing
Color green
Back to top

Connection data

Connection method Screw connection
Stripping length 8 mm
Conductor cross section solid 0.5 mm² ... 2.5 mm²
Conductor cross section flexible 0.25 mm² ... 2.5 mm²
Conductor cross section AWG 20 ... 14
Tightening torque 1 Nm
Back to top

Standards and Regulations

Electromagnetic compatibility Conformance with EMC directive
Noise emission EN 61000-6-3
Noise immunity EN 61000-6-2
Standards/regulations EN 50178
Rated insulation voltage 300 V
Insulation Basic insulation
Pollution degree 2
Overvoltage category III
Low Voltage Directive Conformance with Low Voltage Directive
Back to top

Environmental Product Compliance

China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Back to top

Classifications

eCl@ss

eCl@ss 4.0 27371100
eCl@ss 4.1 27371100
eCl@ss 5.0 27371800
eCl@ss 5.1 27371800
eCl@ss 6.0 27371800
eCl@ss 7.0 27371803
eCl@ss 8.0 27371803
eCl@ss 9.0 27371803
Back to top

ETIM

ETIM 4.0 EC001441
ETIM 5.0 EC001441
ETIM 6.0 EC001441
ETIM 7.0 EC001441
Back to top

UNSPSC

UNSPSC 6.01 30211916
UNSPSC 7.0901 39121535
UNSPSC 11 39121535
UNSPSC 12.01 39121535
UNSPSC 13.2 39121106
Back to top

PHOENIX CONTACT Ltd

Unit 15C, 906-930 Great South Road, Penrose
Auckland 1061
New Zealand

Phone: 0508 474 636
Toll Free (Local)
09 950 8495
  • Create PDF
  • Recommend
  • Feedback

This website uses cookies, by continuing to browse, you agree to our cookie policy. Read our privacy policy for more information.

Close