D-SUB bus connector - SUBCON 9/M-SH - 2761509

D-SUB connector, 9-pos., male connector, one cable entry < 35°, universal type for all systems, pin assignment: 1, 2, 3, 4, 5, 6, 7, 8, 9 to screw connection terminal block

Price:

Overview

Technical data

Accessories

Approvals

Downloads

Drawings



Dimensional drawing  

Dimensional drawing

Schematic diagram  

Schematic diagram
Function elements



Schematic diagram  

Schematic diagram
Opening the housing

Schematic diagram  

Schematic diagram
Left-hand side cable entry



Schematic diagram  

Schematic diagram
Right-hand side cable entry

Back to top

Dimensions

Max. cable diameter 10 mm
Min. cable diameter 4 mm
Width 16 mm
Height 55 mm
Length 56.5 mm
Back to top

Ambient conditions

Ambient temperature (operation) -20 °C ... 75 °C
Ambient temperature (storage/transport) -25 °C ... 80 °C
Altitude ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
Degree of protection IP20
IP20
Back to top

General

Nominal voltage UN 50 V DC
Nominal current IN 100 mA
Signal Modbus
RS-232
RS-422
RS-485
Insertion/withdrawal cycles > 200
SUBCON fixing screws 4-40 UNC
Tightening torque 0.4 Nm
Housing material ABS, metal-plated
Pin assignment All connections are 1:1 on the screw terminal block
MTTF 6706 Years (SN 29500 standard, temperature 25 °C, operating cycle 21 % (5 days a week, 8 hours a day))
1817 Years (SN 29500 standard, temperature 40 °C, operating cycle 34.25 % (5 days a week, 12 hours a day))
155 Years (SN 29500 standard, temperature 40 °C, operating cycle 100 % (7 days a week, 24 hours a day))
Back to top

Connection data

Connection D-SUB connection
Number of positions 9
Connection method D-SUB connector
Connection PCB connection
Connection method Screw connection
Conductor cross section flexible min. 0.14 mm²
Conductor cross section flexible max. 1 mm²
Conductor cross section solid min. 0.14 mm²
Conductor cross section solid max. 1.5 mm²
Min. AWG conductor cross section, flexible 26
Max. AWG conductor cross section, flexible 18
Conductor cross section AWG min. 26
Conductor cross section AWG max. 16
Stripping length 5 mm
Tightening torque 0.4 Nm
Back to top

Conformance/approvals

Designation EAC
Identification EAC
Designation ATEX
Identification  II 3 G Ex nA IIC T4 Gc X
Additional text Please follow the special installation instructions in the documentation!
Designation Corrosive gas test
Identification ISA-S71.04-1985 G3 Harsh Group A
Back to top

Standards and Regulations

Free from substances that could impair the application of coating according to P-VW 3.10.7 57 65 0 VW-AUDI-Seat central standard
Connection in acc. with standard CUL
Back to top

Environmental Product Compliance

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Back to top

Classifications

eCl@ss

eCl@ss 4.0 27140800
eCl@ss 4.1 27140800
eCl@ss 5.0 27143400
eCl@ss 5.1 27143400
eCl@ss 6.0 27143400
eCl@ss 7.0 27440302
eCl@ss 8.0 27440302
eCl@ss 9.0 27440302
Back to top

ETIM

ETIM 2.0 EC001132
ETIM 3.0 EC001132
ETIM 4.0 EC001132
ETIM 5.0 EC001132
ETIM 6.0 EC001132
ETIM 7.0 EC001132
Back to top

UNSPSC

UNSPSC 6.01 30211802
UNSPSC 7.0901 39121402
UNSPSC 11 39121402
UNSPSC 12.01 39121402
UNSPSC 13.2 39121522
Back to top

PHOENIX CONTACT Ltd

Unit 15C, 906-930 Great South Road, Penrose
Auckland 1061
New Zealand

Phone: 0508 474 636
Toll Free (Local)
09 950 8495
  • Create PDF
  • Recommend
  • Feedback

This website uses cookies, by continuing to browse, you agree to our cookie policy. Read our privacy policy for more information.

Close