Inline terminal - IB IL 24 DO 8/HD-ECO - 2702793

Inline ECO, Digital output terminal, Digital outputs: , 24 V DC, 500 mA, connection method: 1-wire, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connector



Technical data





Connection diagram  

Connection diagram

Block diagram  

Block diagram
Internal wiring of the terminal points

Dimensional drawing  

Dimensional drawing

Back to top


Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
Back to top


Dimensional drawing
Width 12.2 mm
Height 119.8 mm
Depth 71.5 mm
Back to top

Ambient conditions

Ambient temperature (operation) 0 °C ... 55 °C
Ambient temperature (storage/transport) -25 °C ... 85 °C
Permissible humidity (operation) 10 % ... 95 % (according to DIN EN 61131-2)
Permissible humidity (storage/transport) 10 % ... 95 % (according to DIN EN 61131-2)
Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level)
Degree of protection IP20
Back to top

Connection data

Designation Inline connector
Connection method Spring-cage connection
Conductor cross section solid min. 0.08 mm²
Conductor cross section solid max. 1.5 mm²
Conductor cross section flexible min. 0.08 mm²
Conductor cross section flexible max. 1.5 mm²
Conductor cross section AWG min. 28
Conductor cross section AWG max. 16
Stripping length 8 mm
Back to top


Mounting type DIN rail
Color green
Net weight 84 g
Note on weight specifications with connector
Diagnostics messages Short-circuit / overload of the digital outputs Error message in the diagnostic code (bus) and display (2 Hz) via the LED (D) on the module
Back to top


Designation Inline local bus
No. of channels 2
Connection method Inline data jumper
Transmission speed 500 kbps
Back to top

Inline potentials

Designation Communications power (UL)
Supply voltage 7.5 V DC (via voltage jumper)
Current consumption max. 45 mA
Power consumption max. 0.62 W
Designation Segment circuit supply (US)
Supply voltage 24 V DC (via voltage jumper)
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current consumption max. 4 A
0 A
Back to top

Digital outputs

Output name Digital outputs
Connection method Spring-cage connection
Connection technology 1-wire
Number of outputs 8
Protective circuit Overload protection, short-circuit protection of outputs Zener diode in output chip
Output voltage 24 V DC (US - 1 V)
Nominal output voltage 24 V DC
Maximum output current per channel 500 mA
Maximum output current per module 4 A
Nominal load, inductive 12 VA (1.2 H, 50 Ω)
Nominal load, lamp 12 W
Nominal load, ohmic 12 W (48 Ω)
Output voltage when switched off max. 1 V
Output current when switched off max. 300 µA
Behavior with overload Auto restart
Behavior with inductive overload Output can be destroyed
Reverse voltage resistance to short pulses Reverse voltage proof
Back to top

Electrical isolation

Test section 7.5 V supply (bus logics)/24 V supply (I/O) 500 V AC 50 Hz 1 min.
7.5 V supply (bus logics) / functional earth ground 500 V AC 50 Hz 1 min.
24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min.
Back to top

Standards and Regulations

Protection class III (IEC 61140, EN 61140, VDE 0140-1)
Back to top

Environmental Product Compliance

REACh SVHC Lead 7439-92-1
China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Back to top



eCl@ss 5.1 27242604
eCl@ss 6.0 27242600
eCl@ss 7.0 27242604
eCl@ss 8.0 27242604
eCl@ss 9.0 27242604
Back to top


ETIM 5.0 EC001599
ETIM 6.0 EC001599
ETIM 7.0 EC001599
Back to top


Unit 15C, 906-930 Great South Road, Penrose
Auckland 1061
New Zealand

Phone: 0508 474 636
Toll Free (Local)
09 950 8495
  • Create PDF
  • Recommend
  • Feedback

This website uses cookies, by continuing to browse, you agree to our cookie policy. Read our privacy policy for more information.