Wireless module - FL WLAN 2100 - 2702535

WLAN access point, client with two internal antennas (MIMO) for single-hole mounting, IP66/IP68, WLAN 802.11 a, b, g, n, frequency: 2.4 GHz, 5 GHz (incl. DFS channels), connections: COMBICON 9 ... 32 V DC, RJ45: for LAN, web, http/https, CLI

Price:

Overview

Technical data

Accessories

Approvals

Downloads

Dimensions

Width 62.8 mm
Height 36.5 mm
Depth 113.2 mm
Note on dimensions Outside dimensions
Back to top

Ambient conditions

Ambient temperature (operation) -40 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 70 °C
Permissible humidity (operation) 5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing)
Air pressure (operation) 800 hPa ... 1080 hPa (up to 2000 m above sea level)
Air pressure (storage/transport) 660 hPa ... 1080 hPa (up to 3500 m above sea level)
Degree of protection IP65
IP66
IP67
IP68
Note Degree of protection when installed
Back to top

Wireless interface

Designation Wireless LAN
Wireless standard IEEE 802.11
a
b
g
n
Antenna connection method (Internal)
Frequency band 2.4 GHz
5 GHz
Transmission power max. 20 dBm (EIRP)
Number of wireless interfaces 1 IEEE 802. 11 a/b/g/n
Wireless modules that can be connected 60
Back to top

Functions

Operating modes Access Point / Client Adapter / Repeater
Configuration Web-based management, automated CLI
Quality of service (QoS) Yes
Security 802.11i
WPA PSK (preshared key)
WPA2
AES
TKIP
MAC filter
Back to top

Wireless card

Number 1
Type IEEE 802.11 a/b/g/n 2.4 GHz and 5 GHz to 300 Mbps
Assembly instructions Permanently installed
Back to top

Antenna

Assembly instructions Internal antenna
Number 2
Connection method permanently installed
Note on the connection method MIMO
Gain 5 dBi
Back to top

Ethernet interface

Interface Ethernet (RJ45)
Number of interfaces 1
Connection method RJ45
Note on the connection method Auto negotiation and autocrossing
Transmission speed 10/100 Mbps
Transmission physics Copper
Transmission length 100 m (per segment)
Back to top

Power supply for module electronics

Connection technology COMBICON
Connection method Push-in spring connection
Designation 1966101 FMC 1,5/ 3-STF-3,5
Number of positions 3
Cross section range AWG 24 ... 16 (Use copper wires rated 75° C (UL))
Note on the connection method Recommended conductor cross section: 0.75 mm²
Recommended ferrule: connection length 10 mm
Recommended crimping pliers: trapezoidal or square
Supply voltage 24 V DC (SELV)
Supply voltage range 18 V DC ... 32 V DC (PELV/SELV)
9 V DC ... 32 V DC ()
Supply current typ. 120 mA (at 24 V DC)
Current consumption max. 250 mA (at 18 V DC)
max. 400 mA (at 9 V DC)
Back to top

Connection data

Designation 1966101 FMC 1,5/ 3-STF-3,5
Connection method Push-in spring connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 1.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 1.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 16
Stripping length 10 mm
Back to top

General

Mounting type Single-hole mounting
Net weight 370.2 g
Note Degree of protection when installed
Wireless licenses EU, more countries in e-shop
Wireless licences Belgium
Bulgaria
Denmark
Germany
Estonia
Finland
France
Greece
Great Britain
Ireland
Italy
Latvia
Liechtenstein
Lithuania
Luxembourg
Malta
Netherlands
Norway
Austria
Poland
Portugal
Romania
Sweden
Switzerland
Slovakia
Slovenia
Spain
Czech Republic
Hungary
Cyprus (rep.)
China
Japan
South Korea
Back to top

Standards and Regulations

Mechanical tests Shock in acc. with EN 60068-2-27/IEC 60068-2-27 30g, 11 ms half-sine shock pulse
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g, 10 ... 150 Hz
Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g, 16 ms, 6000 shocks
Broadband noise according to EN 60068-2-64 Category 1, Class A
Standards/regulations EN 61000-4-2
Contact discharge ± 4 kV
Indirect discharge ± 6 kV
Standards/regulations EN 61000-4-4
Comments ± 2.2 kV
Standards/regulations EN 61000-4-5
Signal ± 0.5 kV (symmetrical)
± 1 kV (asymmetrical)
Standards/regulations EN 55022
Test result Class B
Standards/regulations EN 61000-4-6
Frequency range 0.15 MHz ... 80 MHz
Voltage 10 V
Back to top

Environmental Product Compliance

REACh SVHC Lead 7439-92-1
Back to top

Classifications

eCl@ss

eCl@ss 10.0.1 19170501
eCl@ss 4.0 24010504
eCl@ss 4.1 24010504
eCl@ss 5.0 19030112
eCl@ss 5.1 19030100
eCl@ss 6.0 19170200
eCl@ss 7.0 19170201
eCl@ss 8.0 19170201
eCl@ss 9.0 19170201
Back to top

ETIM

ETIM 3.0 EC000817
ETIM 4.0 EC000816
ETIM 5.0 EC000816
ETIM 6.0 EC000816
ETIM 7.0 EC000816
Back to top

UNSPSC

UNSPSC 6.01 43172710
UNSPSC 7.0901 43223108
UNSPSC 11 43172710
UNSPSC 12.01 43223108
UNSPSC 13.2 43223108
Back to top

PHOENIX CONTACT Ltd

Unit 15C, 906-930 Great South Road, Penrose
Auckland 1061
New Zealand

Phone: 0508 474 636
Toll Free (Local)
09 950 8495
  • Create PDF
  • Recommend
  • Feedback

This website uses cookies, by continuing to browse, you agree to our cookie policy. Read our privacy policy for more information.

Close