Communication module - RAD-RS485-IFS - 2702184

Radioline - RS-485 multipoint multiplexer, can be extended with I/O modules, can be used as Modbus/RTU bus coupler or can be combined with Radioline wireless system, up to 99 stations, range of up to 1.2 km on in-house copper cables

Price:

Overview

Technical data

Accessories

Approvals

Downloads

Drawings



Functional drawing  

Functional drawing
I/O-to-I/O, only RS-485

Functional drawing  

Functional drawing
I/O-to-I/O, wireless, and RS-485



Functional drawing  

Functional drawing
Modbus/RTU slave

Functional drawing  

Functional drawing
Radioline wireless system and RS-485 stations at a Modbus master (I/O-to-serial)



Functional drawing  

Functional drawing
Radioline connection station with up to 32 I/O extension modules

Schematic diagram  

Schematic diagram



Schematic diagram  

Schematic diagram
Configuration with memory stick

Schematic diagram  

Schematic diagram
DIP switches



Back to top

Note

Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
Back to top

Dimensions

Width 17.5 mm
Height 113 mm
Depth 114.5 mm
Back to top

Ambient conditions

Degree of protection IP20
Ambient temperature (operation) -40 °C ... 70 °C (>55°C derating)
-40 °F ... 158 °F (>131°F derating)
Ambient temperature (storage/transport) -40 °C ... 85 °C
-40 °F ... 185 °F
Permissible humidity (operation) 20 % ... 85 %
Permissible humidity (storage/transport) 20 % ... 85 %
Altitude 2000 m
Vibration (operation) in accordance with IEC 60068-2-6: 5g, 10 Hz ... 150 Hz
Shock 16g, 11 ms
Back to top

General

Operating mode I/O data (Default setting, configuration via thumbwheel)
Modbus/RTU slave (Default setting, configuration via thumbwheel)
Overvoltage category II
Assembly instructions on standard DIN rail NS 35 in accordance with EN 60715
Degree of pollution 2
Housing material PA 6.6-FR
Flammability rating according to UL 94 V0
MTTF 1233 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
514 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle (5 days a week, 12 hours a day))
212 Years (Telcordia standard, temperature 40 °C, operating cycle 100 % (7 days a week, 24 hours a day))
Back to top

Supply

Supply voltage range 19.2 V DC ... 30.5 V DC
Max. current consumption ≤ 65 mA (at 24 V DC, at 25 °C, stand-alone)
≤ 6 A (at 24 V DC, with DIN rail connector at full capacity)
Transient surge protection Yes
Back to top

Serial interface

Interface 1 RS-485
Connection method COMBICON plug-in screw terminal block
Connection technology 2-wire
Transmission length ≤ 1200 m
Termination resistor 390 Ω (switchable via DIP switches)
150 Ω (switchable via DIP switches)
390 Ω (switchable via DIP switches)
Data rate 300 bps / 600 bps / 1.2 kbps / 2.4 kbps / 4.8 kbps / 9.6 kbps / 19.2 kbps / 38.4 kbps / 57.6 kbps / 93.75 kbps / 115.2 kbps (Default setting: 19.2/8/E/1)
Interface 2 Configuration interface
Connection method S-PORT (socket)
Back to top

RF link relay output

Number of outputs 1
Contact type PDT
Contact material PdRu, gold-plated
Maximum switching voltage 30 V AC/DC
60 V DC
Max. switching current 500 mA (30 V AC/DC)
Electrical service life 5x 105 switching cycles with 0.5 A at 30 V DC
Back to top

Connection data

Connection method Screw connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 14
Stripping length 7 mm
Tightening torque 0.6 Nm
Screw thread M3
Back to top

Status indicator

Status display Green LED (supply voltage, PWR)
Green LED (bus communication, DAT)
Red LED (periphery error, ERR)
Green LED (receive data, RX)
Green LED (transmit data, TX)
Back to top

Standards and Regulations

Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
Flammability rating according to UL 94 V0
Shock 16g, 11 ms
Vibration (operation) in accordance with IEC 60068-2-6: 5g, 10 Hz ... 150 Hz
Conformance CE-compliant
ATEX  II 3 G Ex nA nC IIC T4 Gc
IECEx Ex nA nC IIC T4 Gc
UL, USA/Canada UL 508 Listed
Class I, Div. 2, Groups A, B, C, D T4A
Class I, Zone 2, IIC T4
Noxious gas test ISA-S71.04-1985 G3 Harsh Group A
Back to top

Environmental Product Compliance

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Back to top

Articles in set

DIN rail bus connectors ME 17,5 TBUS 1,5/ 5-ST-3,81 GN 2709561

DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.

Back to top

Classifications

eCl@ss

eCl@ss 10.0.1 19179290
eCl@ss 5.1 27242200
eCl@ss 6.0 19179200
eCl@ss 7.0 19179290
eCl@ss 8.0 19179290
eCl@ss 9.0 19179290
Back to top

ETIM

ETIM 5.0 EC000310
ETIM 6.0 EC000310
ETIM 7.0 EC000310
Back to top

UNSPSC

UNSPSC 13.2 43222604
Back to top

PHOENIX CONTACT Ltd

Unit 15C, 906-930 Great South Road, Penrose
Auckland 1061
New Zealand

Phone: 0508 474 636
Toll Free (Local)
09 950 8495
  • Create PDF
  • Recommend
  • Feedback

This website uses cookies, by continuing to browse, you agree to our cookie policy. Read our privacy policy for more information.

Close