Bus coupler - AXL F BK PN XC - 2701222

Similar figure

Axioline F bus coupler for PROFINET, version for extreme conditions (including bus base module and connector)



Technical data





Connection diagram  

Connection diagram

Block diagram  

Block diagram
Internal wiring of the terminal points

Dimensional drawing  

Dimensional drawing

Back to top


Dimensional drawing
Width 45 mm
Height 126.1 mm
Depth 74 mm
Note on dimensions The depth is valid when a TH 35-7,5 DIN rail is used (according to EN 60715).
Back to top

Ambient conditions

Ambient temperature (operation) -25 °C ... 60 °C (Mounting position: wall mounting on horizontal DIN rail)
-25 °C ... 55 °C (Mounting position: any)
-40 °C ... 70 °C (Extended, see section “Tested successfully: use under extreme ambient conditions” in the data sheet.)
Permissible humidity (operation) 5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing)
Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level)
Degree of protection IP20
Back to top


Mounting type DIN rail mounting
Net weight 222 g
Note on weight specifications with connector and bus base module
Mounting type DIN rail mounting
Back to top


Designation PROFINET
No. of channels 2
Connection method RJ45 socket, auto negotiation and auto crossing
Transmission speed 100 Mbps (Full duplex)
Transmission physics Ethernet in RJ45 twisted pair
Designation Axioline F local bus
Connection method Connection for bus base module
Transmission speed 100 Mbps
Designation Service
Connection method Micro USB type B
Back to top

System limits of the bus coupler

Number of supported devices max. 63 (per station)
Number of local bus devices that can be connected max. 63
Back to top

Power supply for module electronics

Supply voltage range
Back to top

Inline potentials

Supply voltage 24 V DC
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Back to top

Axioline potentials

Designation Communications power UL feed-in (the supply of the Axioline F local bus UBus is generated from UL)
Supply voltage 24 V DC
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current consumption max. 570 mA (with 2 A at UBus for the I/Os and UL = 24 V)
Power consumption max. 13.7 W (with 2 A load at UBus for the I/Os)
Designation Axioline F local bus supply (UBus)
Supply voltage 5 V DC (via bus base module)
Power supply unit 2 A
Type of protection Surge protection of the supply voltage
Polarity reversal protection of the supply voltage
Back to top

Digital inputs

Connection technology Push-in connection
Back to top

Environmental Product Compliance

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Back to top



eCl@ss 4.0 27240490
eCl@ss 4.1 27240490
eCl@ss 5.0 27242208
eCl@ss 5.1 27242608
eCl@ss 6.0 27242600
eCl@ss 7.0 27242608
eCl@ss 8.0 27242608
eCl@ss 9.0 27242608
Back to top


ETIM 3.0 EC001604
ETIM 4.0 EC001604
ETIM 5.0 EC001604
ETIM 6.0 EC001604
ETIM 7.0 EC001604
Back to top


UNSPSC 6.01 43172015
UNSPSC 7.0901 43201404
UNSPSC 11 39121311
UNSPSC 12.01 39121311
UNSPSC 13.2 39121311
Back to top


Unit 15C, 906-930 Great South Road, Penrose
Auckland 1061
New Zealand

Phone: 0508 474 636
Toll Free (Local)
09 950 8495
  • Create PDF
  • Recommend
  • Feedback

This website uses cookies, by continuing to browse, you agree to our cookie policy. Read our privacy policy for more information.