Flush-type connector - SACC-DSI-M12FSS-4CON-M16/0,5PE - 1424133

Flush-type connector, Power, 4-position, Socket, M12, S power, Rear mounting, M16 x 1.5, Individual wires, cable length: 0.5 m



Technical data




Dimensional drawing  

Dimensional drawing
M12 flush-type socket

Circuit diagram  

Circuit diagram
Contact assignment of the M12 socket

Schematic diagram  

Schematic diagram
Pin assignment of M12 socket, 4-pos., S-coded, socket side view

Back to top


Length of cable 0.5 m
Back to top

Ambient conditions

Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket)
Degree of protection IP67
Back to top


Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Rated current at 40°C 12 A
Rated voltage 630 V
Rated surge voltage 6 kV
Number of positions 4
Insulation resistance ≥ 100 MΩ
Coding S power
Standards/regulations M12 connector IEC 61076-2-111 In line with
Signal type/category Power
Status display No
Overvoltage category III
Degree of pollution 3
Test voltage 6 kV
Connection method Individual wires
Insertion/withdrawal cycles > 100
Torque 3 Nm ... 4 Nm (M12 connector)
Mounting type Rear mounting M16 x 1.5 With flat nut
Back to top


Flammability rating according to UL 94 V0
Contact material CuZn
Contact surface material Au
Contact carrier material PA
Material, knurls CuZn alloy, nickel-plated
Sealing material FKM
Additional material specifications PU 2K (Grout material)
Back to top


Cable type UL/cUL stranded hook-up wire
Conductor cross section 1.31 mm²
AWG signal line 16
Core diameter including insulation 2.2 mm
Wire colors Black 1, black 2, black 3, green/yellow
Material conductor insulation
Conductor material Bare Cu litz wires
Standards/specifications M12 connector IEC 61076-2-111 In line with
Flame resistance in acc. to UL 1581 VW1
Halogen-free yes
Ambient temperature (operation) -40 °C ... 105 °C (cable, fixed installation)
-20 °C ... 105 °C (cable, flexible installation)
Back to top

Standards and Regulations

Standard designation M12 connector
Standards/regulations IEC 61076-2-111
Flame resistance in acc. to UL 1581 VW1
Halogen-free yes
Flammability rating according to UL 94 V0
Back to top

Environmental Product Compliance

Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Back to top



eCl@ss 4.0 27140815
eCl@ss 4.1 27140815
eCl@ss 5.0 27143423
eCl@ss 5.1 27143400
eCl@ss 6.0 27279200
eCl@ss 7.0 27440103
eCl@ss 8.0 27440103
eCl@ss 9.0 27440102
Back to top


ETIM 3.0 EC002061
ETIM 4.0 EC002062
ETIM 5.0 EC002061
ETIM 6.0 EC002061
Back to top


UNSPSC 6.01 31251501
UNSPSC 7.0901 31251501
UNSPSC 11 31251501
UNSPSC 12.01 31251501
UNSPSC 13.2 39121413
Back to top


Unit 15C, 906-930 Great South Road, Penrose
Auckland 1061
New Zealand

Phone: 0508 474 636
Toll Free (Local)
09 950 8495
  • Create PDF
  • Recommend
  • Feedback

This website uses cookies, by continuing to browse, you agree to our cookie policy. Read our privacy policy for more information.