Power connectors - SACC-M12MRT-4CON-PG11-M - 1408988

Power connectors, 4-position, Plug angled M12, T-coded, Screw connection, knurl material: Zinc die-cast, nickel-plated, cable gland Pg11, external cable diameter 8 mm ... 10 mm, Contact 4 leading

Price:

Overview

Technical data

Accessories

Approvals

Downloads

Drawings



Dimensional drawing  

Dimensional drawing
M12 x 1 male plug, angled

Schematic diagram  

Schematic diagram
Pin assignment for M12 plug, 4-pos., T-coded, view of plug side



Back to top

Dimensions

Wrench size, union nut 19 mm
Diameter housing 20.2 mm
Length 44 mm
External cable diameter 8 mm ... 10 mm
Stripping length of the sheath 20 mm
Stripping length of the individual wire 5 mm
Back to top

Ambient conditions

Ambient temperature (operation) -40 °C ... 85 °C (Plug / socket)
Degree of protection IP67
Back to top

General

Note Strip 22 mm off the cable sheath, strip 7 mm off the conductor insulation, crimp the ferrule, then shorten this to 5 mm. Length of conductor with shortened ferrule: 20 mm. Connect conductors and tighten the mounting screws with 0.2 Nm.
Rated current at 40°C 12 A (when using 1.5 mm² conductors)
12 A (at 40 °C)
Rated voltage 63 V DC
Number of positions 4
Color handle area black
Insulation resistance > 10 GΩ
Coding T power
Standards/regulations M12 connector IEC 61076-2-111
Status display No
Overvoltage category III
Degree of pollution 3
Connection method Screw connection
Conductor cross section 0.75 mm² ... 1.5 mm² (without ferrule)
0.75 mm² ... 1.5 mm² (with ferrule)
0.75 mm² ... 1.5 mm² (solid)
Conductor cross section AWG 18 ... 16 (without ferrule)
18 ... 16 (with ferrule)
Insertion/withdrawal cycles > 100
Torque 0.4 Nm (M12 knurl)
1.5 Nm ... 2 Nm (Pressure screw with sleeve housing)
0.4 Nm (Screw plug insert with sleeve housing as far it will go)
0.2 Nm (Screw terminal blocks)
Assembly instructions The wires can be connected both with ferrules and without ferrules
The connector pin assignment can be rotated 90° to the cable outlet
Back to top

Material

Flammability rating according to UL 94 V0
Contact material CuZn
Contact surface material Au
Contact carrier material PA
Material of grip body PA
Material, knurls Zinc die-cast, nickel-plated
Sealing material NBR (Cable clamping)
Back to top

Standards and Regulations

Standard designation M12 connector
Standards/regulations IEC 61076-2-111
Flammability rating according to UL 94 V0
Back to top

Environmental Product Compliance

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Back to top

Classifications

eCl@ss

eCl@ss 4.0 27250313
eCl@ss 4.1 27250313
eCl@ss 5.0 27143423
eCl@ss 5.1 27143400
eCl@ss 6.0 27279200
eCl@ss 7.0 27440104
eCl@ss 8.0 27440104
eCl@ss 9.0 27440102
Back to top

ETIM

ETIM 4.0 EC002062
ETIM 5.0 EC002062
ETIM 6.0 EC002062
Back to top

UNSPSC

UNSPSC 6.01 31251501
UNSPSC 7.0901 31251501
UNSPSC 11 31251501
UNSPSC 12.01 31251501
UNSPSC 13.2 39121413
Back to top

PHOENIX CONTACT Ltd

Unit 15C, 906-930 Great South Road, Penrose
Auckland 1061
New Zealand

Phone: 0508 474 636
Toll Free (Local)
09 950 8495
  • Create PDF
  • Recommend
  • Feedback

This website uses cookies, by continuing to browse, you agree to our cookie policy. Read our privacy policy for more information.

Close