Socket Outlet - EV-T2M3SE12-3AC32A-0,7M6,0E10 - 1405214

Infrastructure Socket Outlet for charging electric vehicles with alternating current (AC), compatible with Infrastructure Plugs, Type 2, IEC 62196-2, 32 A / 480 V (AC), 12 V Locking actuator, Single wires, length: 0.7 m, Rear panel mounting, Rear protective cover screw connection

Price:

Overview

Technical data

Accessories

Approvals

Downloads

Drawings



Connection diagram  

Connection diagram
Pin assignment of Infrastructure Socket Outlet

Block diagram  

Block diagram
Block diagram of the locking actuator



Diagram  

Diagram
Locking states of the locking actuator

Dimensional drawing  

Dimensional drawing
Hole image



Dimensional drawing  

Dimensional drawing
Dimensional drawing

Schematic diagram  

Schematic diagram
Rear mounting with rear protective cover screw connection
The screw connection for a protective cover from the accessories range (EV-T2SC) only supports rear mounting. The panel thickness must not exceed 5 mm. The sealing frame that is slid on from the rear must contact the housing panel flush with the flat side and must completely surround the infrastructure socket outlet.



Schematic diagram  

Schematic diagram
Front mounting with rear protective cover screw connection
Front mounting is only possible when the locking actuator is removed. We recommend using an infrastructure socket outlet without pre-assembled locking actuator (EV-T2M3SE-...E0..., e.g., 1621729).
The screw connection for a protective cover from the accessories range (EV-T2SC) only supports rear mounting. The panel thickness must not exceed 10 mm. The sealing frame that is slid on from the front must contact the housing panel flush with the flat side and must completely surround the infrastructure socket outlet.

Schematic diagram  

Schematic diagram
Operating instructions



Schematic diagram  

Schematic diagram
Detection of the Infrastructure Plug

Schematic diagram  

Schematic diagram
Installation positions



Schematic diagram  

Schematic diagram
Panel thickness for rear mounting (max. 50 mm, with Phoenix Contact protective cover, max. 22 mm)

Schematic diagram  

Schematic diagram
Panel thickness for front mounting (in mm)



Back to top

Product definition

Product type Infrastructure Socket Outlet for charging electric vehicles with alternating current (AC), compatible with Infrastructure Plugs
Type Rear protective cover screw connection
Standards/regulations IEC 62196-2
Charging standard Type 2
Charging mode Mode 3, Case B
Note on the connection method Crimp connection, cannot be disconnected
Back to top

Dimensions

Height 96 mm
Width 75 mm
Depth 76.2 mm
Bore dimensions 60 mm x 60 mm
Conductor length 0.7 m (AC cables)
0.5 m (Locking actuator cables)
Cable structure 5x 6.0 mm² + 2x 0.5 mm²
Type of conductor Single wires
Back to top

Ambient conditions

Ambient temperature (operation) -30 °C ... 50 °C
Ambient temperature (storage/transport) -40 °C ... 80 °C
Max. altitude 5000 m (above sea level)
Degree of protection IP44 (plugged in)
IP54 (with protective cover, see accessories)
Back to top

Electrical properties

Maximum charging power 22 kW
Type of charging current AC 3-phase
Number of phases 3
Number of power contacts 5 (L1, L2, L3, N, PE)
Rated current of power contacts 32 A
Rated voltage for power contacts 480 V AC
Number of signal contacts 2 (CP, PP)
Rated current for signal contacts 2 A
Rated voltage for signal contacts 30 V AC
Type of signal transmission Pulse width modulation
Note on the connection method Crimp connection, cannot be disconnected
Back to top

Mechanical properties

Insertion/withdrawal cycles > 10000
Insertion force < 100 N
Withdrawal force < 100 N
Back to top

Mounting

Possible mounting positions Rear panel mounting
Front mounting only possible when the locking actuator is removed (see EV-T2M3SE...E00 versions)
Restrictions to mounting position Only 0 to 90 degree frontal inclination possible, see figure
Mounting position of the locking actuator Top center
Screw connection of a protective cover only rear mounting possible
Max. wall thickness max. 50 mm (Rear panel mounting, normative maximum specification for infrastructure plug)
max. 28 mm (Rear mounting, normative maximum specification for infrastructure plug when using protective cover 1405217)
max. 10 mm (Front mounting, when using the locking mechanism)
Mounting hole diameter 7.00 mm (ø)
Back to top

Design

Design line Standard
Housing color black
Customer variations On request
Back to top

Material

Material Plastic
Material surface of contacts Ag
Back to top

Locking

Locking type Locking in the inserted state with a locking mechanism
Locking voltage 12 V
Locking detection available
Mechanical emergency release available
Back to top

Locking actuator

Typical power supply at the motor 12 V
Possible power supply range at the motor 9 V ... 16 V
Typical motor current for locking 0.2 A
Max. reverse current of the motor 1 A
Max. dwell time with reverse current 1000 ms
Recommended adaptation time 600 ms
Pause time after entry or exit path 3 s
Maximum voltage for locking detection 30 V
Service life > 10000 load cycles
Ambient temperature (operation) -30 °C ... 50 °C
Length of cable 0.5 m
Back to top

Environmental Product Compliance

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 10;
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Back to top

Classifications

eCl@ss

eCl@ss 4.0 27140800
eCl@ss 4.1 27140800
eCl@ss 5.0 27143400
eCl@ss 5.1 27143400
eCl@ss 6.0 27143400
eCl@ss 7.0 27449001
eCl@ss 8.0 27449001
eCl@ss 9.0 27144706
Back to top

ETIM

ETIM 3.0 EC002061
ETIM 4.0 EC002061
ETIM 5.0 EC001321
ETIM 6.0 EC002898
ETIM 7.0 EC002898
Back to top

UNSPSC

UNSPSC 6.01 30211923
UNSPSC 7.0901 39121522
UNSPSC 11 39121522
UNSPSC 12.01 39121522
UNSPSC 13.2 39121522
Back to top

PHOENIX CONTACT Ltd

Unit 15C, 906-930 Great South Road, Penrose
Auckland 1061
New Zealand

Phone: 0508 474 636
Toll Free (Local)
09 950 8495
  • Create PDF
  • Recommend
  • Feedback

This website uses cookies, by continuing to browse, you agree to our cookie policy. Read our privacy policy for more information.

Close