Test terminal strip - RSCWE 6-3/6SL GN/BU - 1090786

Test terminal strip, nom. voltage: 400 V AC/DC, connection method: Ring cable lug, number of connections: 12, number of positions: 6, color: Green/blue

Price:

Overview

Technical data

Accessories

Approvals

Downloads

Drawings



Circuit diagram  

Circuit diagram

Circuit diagram  

Circuit diagram



Back to top

General

Number of positions 6
Number of levels 1
Number of connections 12
Potentials 6
Nominal cross section 6 mm²
Color Green/blue
Insulating material PA
Flammability rating according to UL 94 V0
Rated surge voltage 4 kV
Test surge voltage 5 kV
Overvoltage category III
Insulating material group I
Maximum power dissipation for nominal condition 1.31 W
Maximum load current 30 A (with 10 mm² conductor cross section)
Nominal voltage UN 400 V AC/DC
Open side panel No
Ambient temperature (operation) -60 °C ... 85 °C
Ambient temperature (storage/transport) -25 °C ... 55 °C (For a short time, not exceeding 24 h, -60 to +70 °C)
Permissible humidity (storage/transport) 30 % ... 70 %
Ambient temperature (assembly) -5 °C ... 70 °C
Ambient temperature (actuation) -5 °C ... 70 °C
Back to top

Dimensions

Plate thickness 1 mm ... 4 mm
Back to top

Connection data

Connection 1 level
Connection method Ring cable lug
Screw thread No 8 UNC
Stripping length 12 mm
Tightening torque, min 1.5 Nm
Tightening torque max 1.8 Nm
Connection in acc. with standard IEC 60947-7-1
Conductor cross section flexible min. 0.5 mm²
Conductor cross section flexible max. 10 mm²
Min. AWG conductor cross section, flexible 24
Max. AWG conductor cross section, flexible 8
2 conductors with same cross section, solid min. 0.5 mm²
2 conductors with same cross section, solid max. 6 mm²
2 conductors with same cross section, stranded min. 0.5 mm²
2 conductors with same cross section, stranded max. 6 mm²
Cable lug connection according to standard DIN 46234:1980-03
Min. cross section for cable lug connection 0.5 mm²
Max. cross section for cable lug connection 10 mm²
Hole diameter, min. 4.3 mm
Cable lug width, max. 8 mm
Bolt diameter 4.1 mm
Cable lug connection according to standard DIN 46237:1970-07
Min. cross section for cable lug connection 0.5 mm²
Max. cross section for cable lug connection 10 mm²
Hole diameter, min. 4.3 mm
Cable lug width, max. 8 mm
Bolt diameter 4.1 mm
Internal cylindrical gage A5
Back to top

Mounting

Plate thickness 1 mm ... 4 mm
Back to top

Standards and Regulations

Connection in acc. with standard IEC 60947-7-1
Flammability rating according to UL 94 V0
Back to top

Classifications

eCl@ss

eCl@ss 10.0.1 27141126
eCl@ss 11.0 27141126
eCl@ss 4.0 27141118
eCl@ss 4.1 27141118
eCl@ss 5.0 27141118
eCl@ss 5.1 27141100
eCl@ss 6.0 27141100
eCl@ss 7.0 27141126
eCl@ss 8.0 27141126
eCl@ss 9.0 27141126
Back to top

ETIM

ETIM 4.0 EC000897
ETIM 5.0 EC000902
ETIM 6.0 EC000902
ETIM 7.0 EC000902
Back to top

UNSPSC

UNSPSC 6.01 30211811
UNSPSC 7.0901 39121410
UNSPSC 11 39121410
UNSPSC 12.01 39121410
UNSPSC 13.2 39121410
UNSPSC 18.0 39121410
UNSPSC 19.0 39121410
UNSPSC 20.0 39121410
UNSPSC 21.0 39121410
Back to top

PHOENIX CONTACT Ltd

Unit 15C, 906-930 Great South Road, Penrose
Auckland 1061
New Zealand

Phone: 0508 474 636
Toll Free (Local)
09 950 8495
  • Create PDF
  • Recommend
  • Feedback