Wireless module - FL WLAN 5111 - 1043201

The figure shows a version of the product

WLAN access point for USA/Canada (FCC/IC), client, WLAN 802.11 a, b, g, n, frequency: 2.4 GHz, 5 GHz, IP20, connections: COMBICON for 10 ... 36 V DC, 2x RJ45 for LAN, central cluster management, WBM, 2 antennas (MIMO), 802.11i: WPA2, WPA-PSK, TKIP, AES



Technical data





Width 40 mm
Height 109 mm
Depth 109 mm
Note on dimensions Height with antenna socket, without antenna cable
Back to top

Ambient conditions

Ambient temperature (operation) -25 °C ... 60 °C (extended temperature range on request)
Ambient temperature (storage/transport) -40 °C ... 80 °C
Permissible humidity (operation) 10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 10 % ... 95 % (non-condensing)
Air pressure (operation) 800 hPa ... 1080 hPa (up to 2000 m above sea level)
Air pressure (storage/transport) 660 hPa ... 1080 hPa (up to 3500 m above sea level)
Degree of protection IP20
Back to top

Wireless interface

Designation Wireless LAN
Antenna connection method RSMA (female)
Number 2
Wireless standard IEEE 802.11
Frequency band 2.4 GHz
5 GHz
Transmission power max. 20 dBm
Number of wireless interfaces 1 IEEE 802. 11 a/b/g/n
Back to top


Operating modes Access Point / Client Adapter / Repeater
Basic functions SNMP (V2/V3), CLI, WPS, DHCP, DCP, BootP, HTTP, HTTPS, Syslog, SD card, dual FW image, 1 x DI, 1 x DO, 2 x Ethernet 10/100 Mbit, auto crossover, auto negotiation, MODE button
Configuration Cluster management, web-based management, WPS
Security 802.11i
WPA PSK (preshared key)
Supports 802.1X/RADIUS
MAC filter
Back to top

Wireless card

Number 1
Type IEEE 802.11 a/b/g/n 2.4 GHz and 5 GHz to 300 Mbps
Assembly instructions Permanently installed
Back to top


Assembly instructions Antennas not included in scope of supply
Number 2
Back to top

Ethernet interface

Interface Ethernet (RJ45)
Connection method RJ45
Note on the connection method Auto negotiation and autocrossing
Transmission speed 10/100 Mbps
Transmission physics Copper
Transmission length 100 m (per segment)
Signal LEDs Data receive, link status
Back to top

Power supply for module electronics

Connection method Via COMBICON
Supply voltage 24 V DC
Supply voltage range 10 V DC ... 36 V DC
Supply current 200 mA (at 24 V DC)
Back to top


Mounting type DIN rail
Color silver gray
Net weight 540.3 g
Degree of pollution 2
Wireless licenses USA, Canada
Back to top

Standards and Regulations

Mechanical tests Shock in acc. with EN 60068-2-27/IEC 60068-2-27 30g, 11 ms half-sine shock pulse
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g, 10 ... 150 Hz
Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g, 16 ms, 6000 shocks
Broadband noise according to EN 60068-2-64 Category 1, Class B
Standards/regulations EN 61000-4-2
Contact discharge ± 6 kV
Indirect discharge ± 6 kV
Standards/regulations EN 61000-4-3
EN 61000-4-4
Comments ±2.2 kV
Standards/regulations EN 55022
Test result Class B
Back to top

Environmental Product Compliance

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Back to top



eCl@ss 10.0.1 19170501
eCl@ss 11.0 19170501
eCl@ss 5.0 19030100
eCl@ss 5.1 19030100
eCl@ss 6.0 19170200
eCl@ss 7.0 19170201
eCl@ss 9.0 19170201
Back to top


ETIM 5.0 EC000816
ETIM 6.0 EC000816
ETIM 7.0 EC000816
Back to top


Unit 15C, 906-930 Great South Road, Penrose
Auckland 1061
New Zealand

Phone: 0508 474 636
Toll Free (Local)
09 950 8495
  • Create PDF
  • Recommend
  • Feedback