Feed-through header - HSCH 1,5-3U/18 THR 9005 - 2203408

PCB headers, nominal current: 8 A, rated voltage (III/2): 160 V, nominal cross section: 1.5 mm², number of positions: 18, pitch: 3.45 mm, color: black, contact surface: Tin, mounting: THR soldering, pin layout: Linear pinning, solder pin [P]: 2.3 mm

Price:

Overview

Technical data

Approvals

Downloads

Drawings



Diagram  

Diagram
Type: HSCP-SP 1,5-... with HSCH 1,5-...U/... THR 9005

Dimensional drawing  

Dimensional drawing



Schematic diagram  

Schematic diagram

Back to top

Item properties

Brief article description Feed-through header
Plug-in system HSC 1,5
Type of contact Male connector
Range of articles HSCH 1,5/..-G-THR
Pitch 3.45 mm
Number of positions 18
Mounting type THR soldering
Pin layout Linear pinning
Number of levels 2
Number of connections 18
Number of potentials 18
Back to top

Electrical parameters

Nominal current 8 A
Nom. voltage 160 V
Rated voltage 40 V
Rated voltage (III/2) 160 V
Rated voltage (II/2) 160 V
Rated surge voltage (III/3) 2.5 kV
Rated surge voltage (III/2) 2.5 kV
Rated surge voltage (II/2) 2.5 kV
Back to top

Material data - contact

Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Contact material Cu alloy
Surface characteristics Tin-plated
Back to top

Material data - housing

Housing color black (9005)
Insulating material LCP
Insulating material group IIIb
CTI according to IEC 60112 150
Flammability rating according to UL 94 V0
Glow wire flammability index GWFI according to EN 60695-2-12 850
Glow wire ignition temperature GWIT according to EN 60695-2-13 775
Temperature for the ball pressure test according to EN 60695-10-2 125 °C
Back to top

Dimensions for the product

Dimensional drawing
Caption Schematische Abbildung - weitere Details siehe Produktfamilienzeichnung im Download Center
Length [ l ] 16.4 mm
Width [ w ] 32.8 mm
Height [ h ] 17.45 mm
Pitch 3.45 mm
Height (without solder pin) 13.6 mm
Solder pin [P] 2.3 mm
Pin spacing 5.30 mm
Back to top

Dimensions for PCB design

Hole diameter 1.2 mm
Pin spacing 5.30 mm
Back to top

Packaging information

Dimensional drawing
Type of packaging 56 mm wide tape
Pieces per package 150
Denomination packing units Pcs.
[W] tape width 56 mm
[A] coil diameter 330 mm
[W2] coil overall dimension 62.4 mm
Outer packaging type Transparent-Bag
Back to top

General product information

Type of note Assembly instruction:
Note Refer to the data sheet for the range in the download area.
Back to top

Processing notes

Process Reflow/wave soldering
Specification Following IPC/JEDEC J-STD-020E:2014-12
Following IEC 61760-1:2006-04
Follwing IEC 60068-2-58:2015-03
Moisture Sensitive Level MSL 1
Classification temperature Tc 260 °C
Solder cycles in the reflow 3
Back to top

Ambient conditions

Ambient temperature (storage/transport) -40 °C ... 55 °C
Ambient temperature (assembly) -5 °C ... 100 °C
Ambient temperature (operation) -40 °C ... 105 °C (dependent on the derating curve)
Back to top

Termination and connection method

Conductor connection test The stripped-off ends of the largest conductor can be completely inserted in the opening of the terminal point without using excessive force.
Test result Test passed
Test – repeated connection and release IEC 60999-1:1999-11
Test passed
Test for conductor damage and slackening IEC 60999-1:1999-11
Test passed
Back to top

Pull-out test

Pull-out test IEC 60999-1:1999-11
Test passed
Conductor cross section / conductor type / tensile force 0.2 mm² / solid / > 10 N
0.2 mm² / flexible / > 10 N
1.5 mm² / solid / > 40 N
1.5 mm² / flexible / > 40 N
Back to top

Mechanical tests according to standard

Test specification IEC 61984
Visual inspection IEC 60512-1-1:2002-02
Dimension check IEC 60512-1-2:2002-02
Resistance of inscriptions IEC 60068-2-70:1995-12
Insertion and withdrawal force IEC 60512-13-2:2006-02
No. of cycles 25
Insertion strength per pos. approx. 5 N
Withdraw strength per pos. approx. 3 N
Polarization and coding IEC 60512-13-5:2006-02
Contact holder in insert IEC 60512-15-1:2008-05
Test force per pos. 20 N
Back to top

Air clearances and creepage distances

Clearances and creepage distances IEC 60664-1:2007-04
Specification IEC 60664-1:2007-04
Minimum clearance - inhomogeneous field (III/3) 1.5 mm
Minimum clearance - inhomogeneous field (III/2) 1.5 mm
Minimum clearance - inhomogeneous field (II/2) 1.5 mm
Minimum creepage distance value (III/3) 1.8 mm
Minimum creepage distance value (III/2) 1.6 mm
Minimum creepage distance value (II/2) 1.6 mm
Back to top

Current carrying capacity / derating curves

Diagram
Caption Type: HSCP-SP 1,5-... with HSCH 1,5-...U/... THR 9005
Specification IEC 61984:2008-10
Reduction factor 0.8
Note Representation based on IEC 60512-5-2:2002-02
For number of positions, see diagram
Back to top

Mechanical tests (A)

Test specification IEC 61984
Insertion strength per pos. approx. 5 N
Withdraw strength per pos. approx. 3 N
Polarization when inserted requirement >20 N Test passed
Contact holder in insert requirements >20 N Test passed
Back to top

Durability tests (B)

Specification IEC 60512-9-1:2010-03
Contact resistance R1 1.8 mΩ
Insertion/withdrawal cycles 25
Contact resistance R2 2 mΩ
Impulse withstand voltage at sea level 2.95 kV
Power-frequency withstand voltage 1.39 kV
Insulation resistance, neighboring positions > 3.5 GΩ
Back to top

Thermal tests (C)

Specification IEC 60512-5-1:2002-02
Number of positions 48
Conductor cross section 1.5 mm²
Back to top

Climatic tests (D)

Specification ISO 6988:1985-02
Cold stress -40 °C/2 h
Thermal stress 100 °C/168 h
Corrosive stress 0.2 dm3 SO2 on 300 dm3/40 °C/1 cycle
Impulse withstand voltage at sea level 2.95 kV
Power-frequency withstand voltage 1.39 kV
Back to top

Environmental and durability tests (E)

Specification IEC 61984:2008-10
Result, degree of protection, IP code Finger safety with IP20 test finger
Back to top

Standards and Regulations

Flammability rating according to UL 94 V0
Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
• The item is intended to be an unencapsulated plug for installation in a housing.
• Operate the connector only when it is fully plugged in.
Back to top

Environmental Product Compliance

China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Back to top

Classifications

eCl@ss

eCl@ss 10.0.1 27440402
eCl@ss 4.0 27260700
eCl@ss 4.1 27260700
eCl@ss 5.0 27260700
eCl@ss 5.1 27260700
eCl@ss 6.0 27260700
eCl@ss 7.0 27440402
eCl@ss 8.0 27440402
eCl@ss 9.0 27440402
Back to top

ETIM

ETIM 4.0 EC001031
ETIM 5.0 EC002637
ETIM 6.0 EC002637
ETIM 7.0 EC002637
Back to top

UNSPSC

UNSPSC 13.2 39121409
UNSPSC 18.0 39121409
UNSPSC 19.0 39121409
UNSPSC 20.0 39121409
UNSPSC 21.0 39121409
Back to top

Phoenix Contact UAB

Svitrigailos str. 11B
03228 Vilnius
+370 5 210 6321

  • Create PDF
  • Recommend
  • Feedback