Printed-circuit board connector - GMSTB 2,5/ 8-G BK - 1737699

The figure shows a 10-position version of the product

PCB headers, nominal current: 12 A, rated voltage (III/2): 630 V, nominal cross section: 2.5 mm², number of positions: 8, pitch: 7.5 mm, color: black, contact surface: Tin, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.5 mm

Price:

Overview

Technical data

Approvals

Downloads

Drawings



Diagram  

Diagram
Type: GMSTB 2,5/...-ST with GMSTB 2,5/...-G

Diagram  

Diagram
Type: GMVSTB(R/W) 2,5/...-ST with GMSTB 2,5/...-G



Diagram  

Diagram
Type: GFKC 2,5/...-ST-7,5 with GMSTB 2,5/...-G

Back to top

Item properties

Brief article description Feed-through header
Plug-in system CLASSIC COMBICON
Type of contact Male connector
Range of articles GMSTB 2,5/..-G
Pitch 7.5 mm
Number of positions 8
Mounting type Wave soldering
Pin layout Linear pinning
Locking without
Number of levels 1
Number of connections 8
Number of potentials 8
Back to top

Electrical parameters

Nominal current 12 A
Nom. voltage 630 V
Rated voltage 400 V
Rated voltage (III/2) 630 V
Rated voltage (II/2) 630 V
Rated surge voltage (III/3) 6 kV
Rated surge voltage (III/2) 6 kV
Rated surge voltage (II/2) 6 kV
Back to top

Material data - contact

Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Contact material Cu alloy
Surface characteristics Tin-plated
Metal surface contact area (top layer) Tin (3 - 5 µm Sn)
Metal surface contact area (middle layer) Nickel (1.3 - 3 µm Ni),
Metal surface soldering area (top layer) Tin (3 - 5 µm Sn)
Metal surface soldering area (middle layer) Nickel (1.3 - 3 µm Ni)
Back to top

Material data - housing

Housing color black (9005)
Insulating material PA
Insulating material group I
CTI according to IEC 60112 600
Flammability rating according to UL 94 V0
Glow wire flammability index GWFI according to EN 60695-2-12 850
Glow wire ignition temperature GWIT according to EN 60695-2-13 775
Temperature for the ball pressure test according to EN 60695-10-2 125 °C
Back to top

Dimensions for the product

Dimensional drawing
Caption Schematische Abbildung - weitere Details siehe Produktfamilienzeichnung im Download Center
Length [ l ] 12 mm
Width [ w ] 58.2 mm
Height [ h ] 12.1 mm
Pitch 7.5 mm
Height (without solder pin) 8.6 mm
Solder pin [P] 3.5 mm
Pin dimensions 1 x 1 mm
Back to top

Dimensions for PCB design

Hole diameter 1.4 mm
Back to top

Packaging information

Type of packaging packed in cardboard
Pieces per package 50
Denomination packing units Pcs.
Back to top

General product information

Note In accordance with IEC 61984, COMBICON connectors have no switching power (COC). During designated use, they must not be plugged in or disconnected when carrying voltage or under load.
Back to top

Ambient conditions

Ambient temperature (storage/transport) -40 °C ... 70 °C
Ambient temperature (assembly) -5 °C ... 100 °C
Ambient temperature (operation) -40 °C ... 100 °C (dependent on the derating curve)
Back to top

Air clearances and creepage distances

Clearances and creepage distances IEC 60664-1:2007-04
Specification IEC 60664-1:2007-04
Minimum clearance - inhomogeneous field (III/3) 5.5 mm
Minimum clearance - inhomogeneous field (III/2) 5.5 mm
Minimum clearance - inhomogeneous field (II/2) 5.5 mm
Minimum creepage distance value (III/3) 6.3 mm
Minimum creepage distance value (III/2) 5.5 mm
Minimum creepage distance value (II/2) 5.5 mm
Back to top

Mechanical tests (A)

Test specification IEC 61984
Insertion strength per pos. approx. 8 N
Withdraw strength per pos. approx. 6 N
Polarization when inserted requirement >20 N Test passed
Contact holder in insert requirements >20 N Test passed
Back to top

Durability tests (B)

Specification IEC 60512-9-1:2010-03
Contact resistance R1 1.4 mΩ
Insertion/withdrawal cycles 25
Contact resistance R2 1.4 mΩ
Impulse withstand voltage at sea level 4.8 kV
Power-frequency withstand voltage 2.21 kV
Insulation resistance, neighboring positions > 0.2 TΩ
Back to top

Thermal tests (C)

Specification IEC 60512-5-1:2002-02
Number of positions 12
Conductor cross section 2.5 mm²
Test current 12 A
Upper limiting temperature requirements <100 °C Test passed
Back to top

Climatic tests (D)

Specification ISO 6988:1985-02
Cold stress -40 °C/2 h
Thermal stress 100 °C/168 h
Corrosive stress 0.2 dm3 SO2 on 300 dm3/40 °C/1 cycle
Impulse withstand voltage at sea level 4.8 kV
Power-frequency withstand voltage 2.21 kV
Back to top

Environmental and durability tests (E)

Specification IEC 61984:2008-10
Result, degree of protection, IP code Finger safety with IP20 test finger
Back to top

Vibration test

Specification IEC 60068-2-6:2007-12
Result Test passed
Frequency 10 - 150 - 10 Hz
Sweep speed 1 octave/min
Amplitude 0.35 mm (10 - 60.1 Hz)
Acceleration 5 g (60.1 - 150 Hz)
Test duration per axis 2.5 h
Back to top

Standards and Regulations

Connection in acc. with standard EN-VDE
CSA
Back to top

Environmental Product Compliance

China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Back to top

Classifications

eCl@ss

eCl@ss 10.0.1 27440402
eCl@ss 4.0 27260700
eCl@ss 4.1 27260700
eCl@ss 5.0 27260700
eCl@ss 5.1 27260700
eCl@ss 6.0 27260700
eCl@ss 7.0 27440402
eCl@ss 8.0 27440402
eCl@ss 9.0 27440402
Back to top

ETIM

ETIM 3.0 EC001121
ETIM 4.0 EC002637
ETIM 5.0 EC002637
ETIM 6.0 EC002637
ETIM 7.0 EC002637
Back to top

UNSPSC

UNSPSC 6.01 30211810
UNSPSC 7.0901 39121409
UNSPSC 11 39121409
UNSPSC 12.01 39121409
UNSPSC 13.2 39121409
UNSPSC 18.0 39121409
UNSPSC 19.0 39121409
UNSPSC 20.0 39121409
UNSPSC 21.0 39121409
Back to top

Configurator

You can configure this product!



PHOENIX CONTACT (I) Pvt. Ltd.

A-58/2, Okhla Industrial Area, Phase - II,
New Delhi-110 020
+91.11.30262800

Service

HIGHLIGHTS 2020

Creative solutions for a smart world

Information at first hand

Subscribe to the Phoenix Contact newsletter.

Newsletter
Subscribe to the newsletter
  • Create PDF
  • Recommend
  • Feedback