D-SUB bus connector - SUBCON-PLUS-CAN/90/PG/M12 - 2902322

The figure shows version

D-SUB plug, 9-pos., socket, with PG-D-SUB pin, assignment: 2, 3, 5, 6, 7, 9; two M12 cable glands (A-coded) under 90°. Bus system: CAN, CANopen®. Termination resistor via separate M12 terminator.

Price:

Overview

Technical data

Accessories

Approvals

Downloads

Drawings



Block diagram  

Block diagram
SUBCON-PLUS-CAN/...M12 function block diagram

Dimensional drawing  

Dimensional drawing
SUBCON-PLUS...90...M12 dimensional drawing, short 90° version



Schematic diagram  

Schematic diagram
Function elements
1 = D-SUB 9
2 = Outgoing M12 connection
3 = Incoming M12 connection
4 = D-SUB PG connection (depending on the version)

Back to top

Dimensions

Width 16 mm
Height 40 mm
Length 71 mm
Back to top

Ambient conditions

Ambient temperature (operation) -30 °C ... 80 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Ambient temperature (assembly) -20 °C ... 80 °C
Permissible humidity (operation) 10 % ... 75 % (At +25°C, non-condensing)
Altitude ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
Degree of protection IP40
Back to top

General

Nominal voltage UN 5 V
Nominal current IN 100 mA
Bus system CAN, CANopen, SafetyBus-P
Signal CAN
CANopen®
SUBCON fixing screws 4-40 UNC
Tightening torque 0.4 Nm
Housing material Polyamide
Pin assignment 2, 3, 5, 7, 9
MTTF 6706 Years (SN 29500 standard, temperature 25 °C, operating cycle 21 % (5 days a week, 8 hours a day))
1817 Years (SN 29500 standard, temperature 40 °C, operating cycle 34.25 % (5 days a week, 12 hours a day))
155 Years (SN 29500 standard, temperature 40 °C, operating cycle 100 % (7 days a week, 24 hours a day))
Back to top

Connection data

Connection D-SUB connection
Number of positions 9
Connection method D-SUB socket
Termination resistor separately via M12 termination resistor
Connection Programming connection
Number of positions 9
Connection method D-SUB connector
Connection M12 plug
Number of positions 5
Connection method M12 connector, A-coded
Torque 0.4 Nm
Connection M12 socket
Number of positions 5
Connection method M12 connector, A-coded
Torque 0.4 Nm
Back to top

Conformance/approvals

Designation Corrosive gas test
Identification ISA-S71.04-1985 G3 Harsh Group A
Back to top

Environmental Product Compliance

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Back to top

Classifications

eCl@ss

eCl@ss 4.0 27140800
eCl@ss 4.1 27140800
eCl@ss 5.0 27143400
eCl@ss 5.1 27143400
eCl@ss 6.0 27143400
eCl@ss 7.0 27440302
eCl@ss 8.0 27440302
eCl@ss 9.0 27440302
Back to top

ETIM

ETIM 3.0 EC001132
ETIM 4.0 EC001132
ETIM 5.0 EC001132
ETIM 6.0 EC001132
ETIM 7.0 EC001132
Back to top

UNSPSC

UNSPSC 6.01 30211802
UNSPSC 7.0901 39121402
UNSPSC 11 39121402
UNSPSC 12.01 39121402
UNSPSC 13.2 39121522
Back to top

PHOENIX CONTACT (I) Pvt. Ltd.

A-58/2, Okhla Industrial Area, Phase - II,
New Delhi-110 020
+91.11.30262800
  • Create PDF
  • Recommend
  • Feedback