Redundancy module - STEP-DIODE/5-24DC/2X5/1X10 - 2868606

Redundancy module, 5 ... 24 V DC, 2x 5 A, 1x 10 A

Price:

Overview

Technical data

Approvals

Downloads

Drawings



Block diagram  

Block diagram

Back to top

Dimensions

Width 18 mm
Height 90 mm
Depth 61 mm
Installation distance right/left 0 mm / 0 mm
Installation distance top/bottom 30 mm / 30 mm
Back to top

Ambient conditions

Degree of protection IP20
Ambient temperature (operation) -25 °C ... 70 °C (> 55° C derating : 2.5%/K)
Ambient temperature (storage/transport) -40 °C ... 85 °C
Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing)
Climatic class 3K3 (in acc. with EN 60721)
Degree of pollution 2
Back to top

Input data

Nominal input voltage range 5 V DC ... 24 V DC
5 V DC ... 24 V DC
Input voltage range 4.5 V DC ... 30 V DC
Nominal input current 2x 5 A (-25 °C ... 55 °C)
1x 10 A (-25 °C ... 55 °C)
2x 5 A (-25 °C ... 55 °C)
1x 10 A (-25 °C ... 55 °C)
Back to top

Output data

Nominal output voltage 24 V DC
Setting range of the output voltage (USet) 5 V DC ... 24 V DC
Nominal output current (IN) 10 A (Increasing power)
5 A (Redundancy)
Derating 55 °C ... 70 °C (2.5%/K)
Connection in series No
Power loss nominal load max. 2.5 W (IOUT = 5 A)
Back to top

General

Net weight 0.1 kg
Efficiency > 97 %
> 97 %
MTBF (IEC 61709, SN 29500)
> 25822000 h (40 °C)
Degree of protection IP20
Protection class III
Housing material Plastic
Mounting position horizontal DIN rail NS 35, EN 60715
Assembly instructions alignable: 0 mm horizontally, 30 mm vertically
Back to top

Connection data, input

Connection method Screw connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 12
Stripping length 6.5 mm
Screw thread M3
Back to top

Connection data, output

Connection method Screw connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 12
Stripping length 6.5 mm
Screw thread M3
Back to top

Standards

EMC requirements for noise immunity EN 61000-6-1
EN 61000-6-2
EMC requirements for noise emission EN 61000-6-3
EN 61000-6-4
Standard - Electrical safety IEC 60950-1/VDE 0805 (SELV)
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations EN 50178/VDE 0160 (PELV)
Back to top

Conformance/approvals

UL approvals UL/C-UL listed UL 508
UL/C-UL Recognized UL 60950-1
Back to top

EMC data

Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
Low Voltage Directive Conformance with Low Voltage Directive 2014/35/EC
Electrostatic discharge EN 61000-4-2
Contact discharge 4 kV (Test Level 2)
Discharge in air 8 kV (Test Level 3)
Electromagnetic HF field EN 61000-4-3
Frequency range 80 MHz ... 1 GHz
Test field strength 10 V/m (Test Level 3)
Frequency range 1 GHz ... 2 GHz
Test field strength 10 V/m (Test Level 3)
Frequency range 2 GHz ... 3 GHz
Test field strength 10 V/m (Test Level 3)
Comments Criterion A
Fast transients (burst) EN 61000-4-4
Input 2 kV (Test Level 3 - asymmetrical)
Output 2 kV (Test Level 3 - asymmetrical)
Comments Criterion B
Surge voltage load (surge) EN 61000-4-5
Input 2 kV (Test Level 3 - asymmetrical)
1 kV (Test Level 2 - symmetrical)
Output 2 kV (Test Level 3 - asymmetrical)
1 kV (Test Level 2 - symmetrical)
Comments Criterion B
Conducted interference EN 61000-4-6
I/O/S asymmetrical
Frequency range 150 kHz ... 80 MHz
Voltage 10 V (Test Level 3)
Comments Criterion A
Voltage dips EN 61000-4-11
Criterion A Normal operating behavior within the specified limits.
Criterion B Temporary impairment to operational behavior that is corrected by the device itself.
Back to top

Environmental Product Compliance

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 25;
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Back to top

Classifications

eCl@ss

eCl@ss 10.0.1 27371010
eCl@ss 4.0 27250300
eCl@ss 4.1 27250300
eCl@ss 5.0 27371000
eCl@ss 5.1 27371000
eCl@ss 6.0 27371000
eCl@ss 7.0 27371010
eCl@ss 8.0 27371010
eCl@ss 9.0 27371010
Back to top

ETIM

ETIM 3.0 EC000599
ETIM 4.0 EC002542
ETIM 5.0 EC002540
ETIM 6.0 EC002540
ETIM 7.0 EC002540
Back to top

UNSPSC

UNSPSC 6.01 30211502
UNSPSC 7.0901 39121004
UNSPSC 11 39121004
UNSPSC 12.01 39121004
UNSPSC 13.2 39121004
UNSPSC 18.0 32151504
UNSPSC 19.0 32151504
UNSPSC 20.0 32151504
UNSPSC 21.0 32151504
Back to top

PHOENIX CONTACT (I) Pvt. Ltd.

A-58/2, Okhla Industrial Area, Phase - II,
New Delhi-110 020
+91.11.30262800
  • Create PDF
  • Recommend
  • Feedback