Interface converter - PSM-ME-RS232/RS232-P - 2744461

Interface converter, for the isolation of RS-232 (V.24) interfaces, 4 channels, rail-mountable

Price:

Overview

Technical data

Accessories

Approvals

Downloads

Drawings



Connection diagram  

Connection diagram
Connection to a DTE device

Connection diagram  

Connection diagram
Connection to a DCE device



Application drawing  

Application drawing
Electrical isolation

Application drawing  

Application drawing
Interface adaptation



Dimensional drawing  

Dimensional drawing
Slim design

Circuit diagram  

Circuit diagram



Schematic diagram  

Schematic diagram
Mounting

Back to top

Note

Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
Back to top

Dimensions

Dimensional drawing
Caption Slim design
Width 22.5 mm
Height 99 mm
Depth 118.6 mm
Back to top

Ambient conditions

Ambient temperature (operation) 0 °C ... 55 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Permissible humidity (operation) 10 % ... 95 % (non-condensing)
Altitude ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
Degree of protection IP20
Noise immunity EN 61000-6-2:2005
Back to top

General

Transmission channels 4 (2/2), RxD, TxD, RTS, CTS; full duplex
Bit delay < 3 µs
Bit distortion < 5 %
Electrical isolation VCC // V.24 (RS-232) (A) // V.24 (RS-232) (B)
Test voltage data interfaces 2 kV AC
Test voltage data interface/power supply 2 kV AC
2 kVrms (50 Hz, 1 min.)
Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
Noise emission EN 61000-6-3
Net weight 123.18 g
Housing material PA
Color green
MTBF 2263 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
438 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle (5 days a week, 12 hours a day))
Back to top

Power supply

Nominal supply voltage 24 V AC/DC ±20 %
Supply voltage range 19.2 V AC/DC ... 28.8 V AC/DC
Typical current consumption 40 mA (24 V DC)
Protective circuit Surge protection Suppressor diode
Back to top

Serial interface

Interface 1 V.24 (RS-232) interface in acc. with ITU-T V.28, EIA/TIA-232, DIN 66259-1
Connection method D-SUB 9 plug
Transmission length 15 m (shielded twisted pair)
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 13
Pin assignment DTE/DCE switchover via switch
Protocols supported transparent protocol
Serial transmission speed 115.2 kbps
Interface 2 V.24 (RS-232) interface in acc. with ITU-T V.28, EIA/TIA-232, DIN 66259-1
Connection method Pluggable screw connection
Transmission length 15 m (shielded twisted pair)
Conductor cross section flexible min. 0.2 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 13
Back to top

Conformance/approvals

Designation CE
Identification CE-compliant
Designation EAC
Identification EAC
Designation UL, USA/Canada
Identification 508 Recognized
Class I, Div. 2, Groups A, B, C, D
Class I, Zone 2, AEx nA IIC T4
Class I, Zone 2, Ex nA IIC T4 Gc X
Designation Corrosive gas test
Identification ISA-S71.04-1985 G3 Harsh Group A
Designation Shipbuilding
Identification DNV GL
Temperature B
Humidity A
Vibration A
EMC B
Enclosure Required protection according to the Rules shall be provided upon installation on board
Back to top

Standards and Regulations

Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
Noise emission EN 61000-6-3
Noise immunity EN 61000-6-2:2005
Connection in acc. with standard CUL
Standards/regulations EN 61000-4-2
Contact discharge ± 6 kV (Test Level 3)
Standards/regulations EN 61000-4-3
Frequency range Test Level 3
Standards/regulations EN 61000-4-4
Comments Criterion B
Standards/regulations EN 61000-4-5
Signal ± 2 kV (12 Ω)
Standards/regulations EN 55011
EN 61000-4-6
Back to top

Environmental Product Compliance

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Back to top

Classifications

eCl@ss

eCl@ss 4.0 27250300
eCl@ss 4.1 27250300
eCl@ss 5.0 27242700
eCl@ss 5.1 27242700
eCl@ss 6.0 27242200
eCl@ss 7.0 27242208
eCl@ss 8.0 27242208
eCl@ss 9.0 27242208
Back to top

ETIM

ETIM 2.0 EC000310
ETIM 3.0 EC000310
ETIM 4.0 EC000310
ETIM 5.0 EC000310
ETIM 6.0 EC001423
ETIM 7.0 EC001423
Back to top

UNSPSC

UNSPSC 6.01 30211506
UNSPSC 7.0901 39121008
UNSPSC 11 39121008
UNSPSC 12.01 39121008
UNSPSC 13.2 39122114
Back to top

PHOENIX CONTACT (I) Pvt. Ltd.

A-58/2, Okhla Industrial Area, Phase - II,
New Delhi-110 020
+91.11.30262800
  • Create PDF
  • Recommend
  • Feedback