Sensor/actuator terminal block - DOK 1,5-TG - 2717113

Sensor/actuator terminal block, connection method: Screw connection, cross section: 0.2 mm² - 4 mm², AWG: 24 - 12, width: 6.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15



Technical data




Your advantages

  • Same shape as DIK ... three-level initiator terminal blocks
  • The forks of the insertion bridge can be easily loosened for bridging between non-adjacent terminal blocks
  • Terminal blocks with red and green LEDs are available for optical signaling of the initiator and actuator wiring
  • The upper level contains the feed-through connections for the signal cable which can be labeled
  • Alternate wiring of an actuator followed by an initiator is easy
  • Unlike the DIK terminal blocks, the lower level of these output terminal blocks makes direct contact with the DIN rail and as a PE connection are marked yellow-green
  • Because the spine of the insertion bridge can be snapped into place with the terminal block housing, all the terminal points can be wired freely and the bridge can be securely positioned
  • The middle level supplies the connected actuators with power

Key Commercial Data

Orderkey 2717113
Packing unit 50 pc
Catalog page Page 447 (C-1-2017)
GTIN 4017918062101
Weight per Piece (excluding packing) 15.760 g
Custom tariff number 85369010
Country of origin PL (Poland)


C6 The Exchange
Calmount Park
Dublin 12
D12 XE18
  • Create PDF
  • Recommend
  • Feedback

This website uses cookies, by continuing to browse, you agree to our cookie policy. Read our privacy policy for more information.