Inline terminal - IB IL AI/TEMP 4 RTD-XC-PAC - 2701165

The figure shows the standard item

Inline XC, Analog input terminal, transmission speed in the local bus: 500 kbps, Extreme conditions version, degree of protection: IP20, including Inline connector and labeling field



Technical data



Product Description

The terminal is designed for use within an Inline station.
The terminal has four inputs that can be configured independently of one another for measuring voltages or resistances or for RTDs.
The sensors are connected using 2-conductor technology, so that a nominal resistance of at least 1000 Ω is recommended when sensors with a relatively small temperature coefficient (e.g., platinum sensors) are used.
Resistance measurement with conversion into temperature values can be used for temperature measurement with NTC resistors. The advantage of these resistors is their large temperature coefficient.

Your advantages

  • Voltage inputs 0 V ... 10 V
  • Inputs for temperature measurements
  • Connection of sensors in 2-conductor technology
  • Diagnostic and status indicators
  • Can be used under extreme ambient conditions
  • Extended temperature range of -40 °C ... +70 °C (see “Tested successfully: use under extreme ambient conditions” in the data sheet)
  • Coated PCBs

Key Commercial Data

Orderkey 2701165
Packing unit 1 pc
GTIN 4046356716895
Weight per Piece (excluding packing) 68.000 g


C6 The Exchange
Calmount Park
Dublin 12
D12 XE18
  • Create PDF
  • Recommend
  • Feedback