Products A-Z
Back to overview

Test course

Note: the following tests are particularly suitable for cabling for outdoor applications from Phoenix Contact.

Testing of cabling for outdoor applications

Group 1: electrical
and mechanical tests		Group 2: climatic testsGroup 3: other tests
  • Impact test
  • Resistance test
  • Insulation resistance
  • Current carrying capacity
  • Electric strength
  • Jacket retention test
  • Strain relief test
  • Vibration test
  • Shock test
  • Drop test
  • Broadband noise
  • NEXT and RLOSS
  • Insertion and withdrawal forces
  • Torsion
  • Strain relief
  • Mechanical service life
  • IP67, IP68, IP69K
  • Kesternich test
  • Salt spray test
  • Rapid temperature change
  • Constant humid heat
  • Dry heat
  • Corrosive gases
  • Weather test (UV)
  • Resistance to ozone
  • Visual inspection
  • Dimensional accuracy
  • Polarization test
  • Chemical resistance
  • Resistance to liquids
    (e.g., mineral oils, acids, lyes)
  • Flammability
  • LABS test

Test course

Vibration test

Vibration test

According to M12 connector standard IEC 61076-2-101 and increased broadband noise according to EN 61373:1999

Temperature shock test

Temperature shock test

According to IEC 60512-11-4 (only for connectors with pre-assembled cable)

Noxious gas test

Noxious gas test

According to DIN EN 60512-11-7

Low temperature test

Low temperature test

tests mechanical resistance at low temperatures according to IEC 60068-2-75

UV and ozone test

UV and ozone test

According to solar connector standard DIN EN 50521

IP test

IP test

IP65/IP67/IP69K degrees of protection according to IEC 60529 and IEC 60530

 
Back to overview
Further information
  • Test course

PHOENIX CONTACT Ltd

Halesfield 13
Telford
Shropshire
TF7 4PG
01952 681700

Configurators

Configure products and solutions for your individual application.

Sensor/actuator cabling
Referrer: