Monitoring relay - EMD-SL-PH-400 - 2866077

Monitoring relay for monitoring phase sequence, phase failure and asymmetry, 342…457 V AC, supply from the measurement voltage, 2 changeover contacts

Hinta:

Save money: Best price starts from {0} pieces!

Yleiskatsaus

Tekniset tiedot

Hyväksynnät

Lataukset

Piirustukset



Block diagram  

Block diagram

Takaisin ylös

Dimensions

Width 22.5 mm
Height 90 mm
Depth 113 mm
Takaisin ylös

Ambient conditions

Ambient temperature (operation) -25 °C ... 55 °C
-25 °C ... 40 °C (corresponds to UL 508)
Ambient temperature (storage/transport) -25 °C ... 70 °C
Permissible humidity (operation) 15 % ... 85 %
Degree of protection IP40 (Housing)
IP20 (Connection terminal blocks)
Noise immunity EN 61000-6-2
Takaisin ylös

Input data

Nominal input voltage UN 400 V (3 N ~ 400/230 V)
Function Phase sequence
Phase failure
Asymmetry
Min setting range of the voltage threshold value 342 V AC
Max. setting range of the voltage threshold value 457 V AC
Setting range for response delay ≤ 350 ms (fixed setting)
Setting range for starting delay ≤ 500 ms (fixed setting)
Asymmetry Fixed, approx. 30 %
Recovery time < 100 ms
Takaisin ylös

Contact side

Contact type 2 floating changeover contacts
Maximum switching voltage 250 V AC (in acc. with IEC 60664-1)
Interrupting rating (ohmic load) max. 750 VA (3 A/250 V AC, module aligned, ≤ 5 mm spacing)
1250 VA (5 A/250 V AC, module not aligned, ≥ 5 mm spacing)
Output fuse 5 A (fast-blow)
Takaisin ylös

Power supply

Supply voltage From the measured voltage
Takaisin ylös

General

Mechanical service life approx. 2x 107 cycles
Operating mode 100% operating factor
Mounting position any
Assembly instructions on standard DIN rail NS 35 in accordance with EN 60715
Electromagnetic compatibility Conformance with EMC directive
Housing insulation material Polyamide PA, self-extinguishing
Color green
Takaisin ylös

Connection data

Connection method Screw connection
Stripping length 8 mm
Conductor cross section solid 0.5 mm² ... 2.5 mm²
Conductor cross section flexible 0.25 mm² ... 2.5 mm²
Conductor cross section AWG 20 ... 14
Tightening torque 1 Nm
Takaisin ylös

Standards and Regulations

Low Voltage Directive Conformance with Low Voltage Directive
Electromagnetic compatibility Conformance with EMC directive
Noise emission EN 61000-6-3
Noise immunity EN 61000-6-2
Standards/regulations EN 50178
Rated insulation voltage 300 V
Rated surge voltage 4 kV
Insulation Basic insulation
Pollution degree 2
Overvoltage category III
Takaisin ylös

Environmental Product Compliance

China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Takaisin ylös

Luokitukset

ECLASS

ECLASS 10.0.1 27371803
ECLASS 11.0 27371803
ECLASS 4.0 27371100
ECLASS 4.1 27371100
ECLASS 5.0 27371800
ECLASS 5.1 27371800
ECLASS 6.0 27371800
ECLASS 7.0 27371803
ECLASS 9.0 27371803
Takaisin ylös

ETIM

ETIM 4.0 EC001441
ETIM 6.0 EC001441
ETIM 7.0 EC001441
Takaisin ylös

UNSPSC

UNSPSC 6.01 30211916
UNSPSC 7.0901 39121535
UNSPSC 11 39121535
UNSPSC 12.01 39121535
UNSPSC 13.2 39121106
UNSPSC 18.0 39121106
UNSPSC 19.0 39121106
UNSPSC 20.0 39121106
UNSPSC 21.0 39121106
Takaisin ylös

PHOENIX CONTACT OY

Niittytie 11
FI-01300 Vantaa
Contact Center:
+358 (0)9 3509 0290

Tekninen asiakaspalvelu:
+358 (0)9 3509 0260
  • Luo PDF
  • Suosittele edelleen
  • Palaute