Redundancy module - FL RED 2001E PRP 2LC - 2701864

Ethernet redundancy module for redundant networks with the redundancy protocol PRP.

Hinta:

Save money: Best price starts from {0} pieces!

Yleiskatsaus

Tekniset tiedot

Lisätarvikkeet

Hyväksynnät

Lataukset

Dimensions

Width 40 mm
Height 100 mm
Depth 109 mm
Takaisin ylös

Ambient conditions

Degree of protection IP20
Ambient temperature (operation) -40 °C ... 70 °C
Ambient temperature (storage/transport) -45 °C ... 85 °C
Permissible humidity (operation) 10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 10 % ... 95 % (non-condensing)
Air pressure (operation) 70 kPa ... 106 kPa (3000 m above sea level)
Air pressure (storage/transport) 70 kPa ... 106 kPa (3000 m above sea level)
Takaisin ylös

Interfaces

Interface Ethernet (RJ45)
No. of ports 1 (RJ45 port)
Note on the connection method Auto negotiation and autocrossing
Transmission physics Copper
Transmission speed 10/100 Mbps
Transmission length 100 m (per segment)
Data flow control/protocols IEC 61850-3, IEEE 1613
Interface Ethernet FO
No. of ports 2 (LC multi-mode)
Transmission physics multi-mode fiberglass
Transmission speed 100 Mbps (full duplex)
Transmission length 2 km (per segment)
Takaisin ylös

Function

Basic functions Ethernet redundancy module for the Parallel Redundancy Protocol
Redundancy PRP (Parallel Redundancy Protocol)
Status and diagnostic indicators LEDs: US1, US2 (redundant voltage supply), link and activity per port
Takaisin ylös

Supply voltage

Supply voltage 24 V DC (redundant)
48 V DC (redundant)
Residual ripple 3.6 VPP (within the permitted voltage range)
Supply voltage range 18 V DC ... 58 V DC
Typical current consumption 250 mA (at US = 24 V DC)
Takaisin ylös

General

Mounting type DIN rail
Type AX Block design
Net weight 444 g
Takaisin ylös

Connection data

Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 1.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 1.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 16
Takaisin ylös

Standards and Regulations

Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
Noise emission EN 61000-6-4
Noise immunity IEC 61850-3, IEEE 1613, EN 61000-6-2: 2005
Takaisin ylös

Environmental Product Compliance

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Takaisin ylös

Luokitukset

ECLASS

ECLASS 10.0.1 19170404
ECLASS 11.0 19170404
ECLASS 4.0 24010500
ECLASS 4.1 24010500
ECLASS 5.0 19030100
ECLASS 5.1 19030100
ECLASS 6.0 19170100
ECLASS 7.0 19170101
ECLASS 9.0 19170101
Takaisin ylös

ETIM

ETIM 4.0 EC001478
ETIM 6.0 EC000515
ETIM 7.0 EC000734
Takaisin ylös

UNSPSC

UNSPSC 6.01 20142601
UNSPSC 7.0901 20142601
UNSPSC 11 20142601
UNSPSC 12.01 20142601
UNSPSC 13.2 43201404
UNSPSC 18.0 43201404
UNSPSC 19.0 43201404
UNSPSC 20.0 43201404
UNSPSC 21.0 43201404
Takaisin ylös

PHOENIX CONTACT OY

Niittytie 11
FI-01300 Vantaa
Contact Center:
+358 (0)9 3509 0290

Tekninen asiakaspalvelu:
+358 (0)9 3509 0260
  • Luo PDF
  • Suosittele edelleen
  • Palaute