Network isolator - FL ISOLATOR 100-RJ/RJ - 2313931

Passive network isolator for electrical isolation in Ethernet networks. This protects Ethernet devices from potential differences of up to 4 kV. Can be used for transmission speeds of up to 100 Mbps. Possible to connect two RJ45 plugs.

Hinta:

Save money: Best price starts from {0} pieces!

Yleiskatsaus

Tekniset tiedot

Lisätarvikkeet

Hyväksynnät

Lataukset

Piirustukset



Block diagram  

Block diagram

Dimensional drawing  

Dimensional drawing



Schematic diagram  

Schematic diagram

Takaisin ylös

Dimensions

Dimensional drawing
Width 22.5 mm
Height 99 mm
Depth 92 mm
Takaisin ylös

Ambient conditions

Ambient temperature (operation) -25 °C ... 75 °C
Ambient temperature (storage/transport) -25 °C ... 85 °C
Permissible humidity (operation) 10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing)
Altitude ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
Degree of protection IP20
Takaisin ylös

General

Electrical isolation Ethernet // Ethernet
Test voltage data interface/data interface 4 kV AC (50 Hz, 1 min.)
Insulation voltage input/output 250 Vrms
Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
Mounting type DIN rail mounting
Net weight 118.9 g
Housing material PA 6.6-FR
Color green
MTBF 7993 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
4201 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle (5 days a week, 12 hours a day))
Takaisin ylös

Interfaces

Interface 1 Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3
Interface Ethernet
No. of ports 1
Connection method RJ45 jack, shielded
Transmission length ≤ 100 m (Total length across both ports (dependent on data rate and cable used))
Serial transmission speed 10/100 Mbps
Interface 2 Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3
Interface Ethernet
No. of ports 1
Connection method RJ45 jack, shielded
Serial transmission speed 10/100 Mbps
Takaisin ylös

Conformance/approvals

Designation EAC
Identification EAC
Designation UL, USA / Canada
Identification 508 Listed
Designation Corrosive gas test
Identification ISA-S71.04-1985 G3 Harsh Group A
Designation Shipbuilding
Identification DNV GL
Temperature B
Humidity A
Vibration A
EMC B
Enclosure Required protection according to the Rules shall be provided upon installation on board
Takaisin ylös

Standards and Regulations

Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
Type of test Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6
Test result 5g, 10...150 Hz, 2.5 h, in XYZ direction
Type of test Shock in acc. with EN 60068-2-27/IEC 60068-2-27
Test result 25g, 11 ms period, half-sine shock pulse
Standards/regulations EN 61000-4-2
EN 61000-4-3
Frequency range 26 MHz ... 3 GHz (Test Level 3)
Standards/regulations EN 61000-4-4
EN 61000-6-4
EN 61000-4-6
Frequency range 0.15 MHz ... 80 MHz
Standards/regulations EN 50121 and EN 50155 (for railway applications)
Takaisin ylös

Environmental Product Compliance

China RoHS Environmentally Friendly Use Period = 50 years
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Takaisin ylös

Luokitukset

ECLASS

ECLASS 10.0.1 27240692
ECLASS 11.0 27240692
ECLASS 4.0 27250500
ECLASS 4.1 27230200
ECLASS 5.0 27061800
ECLASS 5.1 27061800
ECLASS 6.0 27249200
ECLASS 7.0 27249290
ECLASS 9.0 27240692
Takaisin ylös

ETIM

ETIM 3.0 EC000313
ETIM 4.0 EC000467
ETIM 6.0 EC002584
ETIM 7.0 EC002584
Takaisin ylös

UNSPSC

UNSPSC 6.01 26121607
UNSPSC 7.0901 26121607
UNSPSC 11 26121607
UNSPSC 12.01 26121607
UNSPSC 13.2 39121552
UNSPSC 18.0 39121552
UNSPSC 19.0 39121552
UNSPSC 20.0 39121552
UNSPSC 21.0 39121552
Takaisin ylös

PHOENIX CONTACT OY

Niittytie 11
FI-01300 Vantaa
Contact Center:
+358 (0)9 3509 0290

Tekninen asiakaspalvelu:
+358 (0)9 3509 0260
  • Luo PDF
  • Suosittele edelleen
  • Palaute