Panel feed-through terminal block - HDFKV 50-VP BU - 0717403

The figure shows version HDFKV 50-VP in gray

Panel feed-through terminal block, connection method: Screw connection with tension sleeve, Cable lug connection, number of positions: 1, load current: 150 A, cross section: 16 mm² - 50 mm², connection direction of the conductor to plug-in direction: -90 °, width: 18.8 mm, color: blue

Price:

Overview

Technical data

Accessories

Downloads

Drawings



Dimensional drawing  

Dimensional drawing

Dimensional drawing  

Dimensional drawing



Back to top

General

Number of levels 1
Number of connections 2
Nominal cross section 50 mm²
Color blue
Insulating material PA
Flammability rating according to UL 94 V0
Maximum load current 150 A
Rated surge voltage 8 kV
Degree of pollution 3
Overvoltage category III
Insulating material group I
Connection in acc. with standard IEC 60947-7-1
Nominal current IN 150 A
Maximum load current 150 A
Nominal voltage UN 690 V
Open side panel No
Number of positions 1
Back to top

Dimensions

Width 18.8 mm
Length 90 mm
Pitch 18.8 mm
Plate thickness 1 mm ... 6 mm
Back to top

Connection data

Note Terminal sleeve
Connection side Level 1 ext. 1
Connection method Screw connection
Note Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
Conductor cross section solid min. 16 mm²
Conductor cross section solid max. 50 mm²
Conductor cross section flexible min. 16 mm²
Conductor cross section flexible max. 50 mm²
Conductor cross section AWG min. 6
Conductor cross section AWG max. 1/0
Conductor cross section flexible, with ferrule without plastic sleeve min. 10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max. 50 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min. 10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max. 50 mm²
2 conductors with same cross section, solid min. 6 mm²
2 conductors with same cross section, solid max. 16 mm²
2 conductors with same cross section, stranded min. 10 mm²
2 conductors with same cross section, stranded max. 16 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum 6 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum 16 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 10 mm²
Stripping length 24 mm
Internal cylindrical gage B10
Screw thread M6
Tightening torque, min 6 Nm
Tightening torque max 8 Nm
Connection side Level 1 int. 1
Connection method Bolt connection
Screw thread M8
Tightening torque, min 12 Nm
Tightening torque max 15 Nm
Back to top

Standards and Regulations

Connection in acc. with standard CSA
IEC 60947-7-1
Flammability rating according to UL 94 V0
Safety note • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
• The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
• The cable entry funnel is not safe to touch. Never connect or disconnect the terminal when it is energized. Take appropriate steps to ensure touch protection.
• To maintain the nominal voltage, align the cable lugs straight and centered, and cast the terminals on the inside.
 There is no electrical contact to the housing. Ensure protective grounding is established for green-yellow color versions.
Back to top

Classifications

eCl@ss

eCl@ss 4.0 27141131
eCl@ss 4.1 27141131
eCl@ss 5.0 27141134
eCl@ss 5.1 27141134
eCl@ss 6.0 27141134
eCl@ss 7.0 27141134
eCl@ss 8.0 27141134
eCl@ss 9.0 27141134
Back to top

ETIM

ETIM 2.0 EC001283
ETIM 3.0 EC001283
ETIM 4.0 EC001283
ETIM 5.0 EC001283
Back to top

UNSPSC

UNSPSC 6.01 30211811
UNSPSC 7.0901 39121410
UNSPSC 11 39121410
UNSPSC 12.01 39121410
UNSPSC 13.2 39121410
Back to top

PHOENIX CONTACT Ltd

8240 Parkhill Drive
Milton, Ontario L9T 5V7
1-800-890-2820

Service

HIGHLIGHTS 2020

Creative solutions for a smart world

PLCnext Technology

The platform for limitless automation.

PLCnext Technology
Visit the PLCnext website
  • Create PDF
  • Recommend
  • Feedback