Printed-circuit board connector - DFK-MSTB 2,5/16-G-5,08 - 0707374

Screw set, for securing the header to the device wall, consists of an M3 x 10 screw, with a spring washer and a nut

Coding section, inserted into the recess in the header or the inverted plug, red insulating material

Keying cap, for forming sections, plugs onto header pin, green insulating material

Locking latch, red insulating material, for housings MSTB 2.5/...ST and MSTBT 2.5/...ST

Slip-on sleeve, non-insulated, 0.5 ... 1 mm², 2.8 x 0.8

Slip-on sleeve, red, 0.5 ... 1.5 mm², 2.8 x 0.8

Slip-on sleeve, fully isolated, red, 0.5 ... 1.5 mm², for plug 2.8 x 0.8 mm

PCB connector, nominal cross section: 1 mm², color: green, nominal current: 10 A, rated voltage (III/2): 630 V, contact surface: Tin, type of contact: Female connector, Number of potentials: 16, Number of rows: 1, Number of positions per row: 16, number of connections: 16, product range: QC 1/..-ST, pitch: 5.08 mm, connection method: Displacement connection, conductor/PCB connection direction: 0 °, Locking clip: - Locking clip, plug-in system: CLASSIC COMBICON, Locking: without, type of packaging: packed in cardboard

PCB connector, nominal cross section: 2.5 mm², color: green, nominal current: 12 A, rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Female connector, Number of potentials: 16, Number of rows: 1, Number of positions per row: 16, number of connections: 16, product range: FKCT 2,5/..-ST, pitch: 5.08 mm, connection method: Push-in spring connection, conductor/PCB connection direction: 0 °, Locking clip: - Locking clip, plug-in system: CLASSIC COMBICON, Locking: without, type of packaging: packed in cardboard