D-SUB bus connector - SUBCON-PLUS-CAN - 2744694

D-SUB connector, 9-pos. female connector, two cable entries < 35° to one terminal block row, bus system: CAN, CANopen®, SafetyBUS p up to 1 Mbps, termination resistor can be switched on via slide switch, pin assignment: 2, 3, 7; screw connection terminal blocks



Technical data




Product Description

The SUBCON-PLUS-CAN/... D-SUB series is specifically designed for use in CAN systems. Under field conditions, it enables the quick and easy connection of the incoming and outgoing bus line.
The terminating resistor is already integrated in all versions. It can be connected externally by means of a slide switch. At the same time, the outgoing bus segment is switched off. This makes it easy to start up segment by segment while incorrect terminations are avoided.
A special feature of the 35° angled connector is that the internal connection unit can be turned round. Whether the cable is to be inserted from the right or left can thus be decided on-site.

Your advantages

  • Separate terminal blocks for bus cables
  • High transmission speed
  • Segment-by-segment startup
  • Flexibility in terms of cable entry selection
  • Assembly under field conditions
  • High level of EMC
  • Suitable for bus cables according to CiA Draft Recommendation 303-1 with an outside diameter of 8 mm
  • Termination resistor can be connected
  • Change to the D-SUB orientation through a reversible connection block
Logo Logo

Key Commercial Data

Orderkey 2744694
Packing unit 1 pc
Sales key DNC541 -
Catalog page Page 449 (C_6_2019)
GTIN 4017918821760
Weight per Piece (excluding packing) 54.300 g
Custom tariff number 85369000
Country of origin DE (Germany)


Unit 7, 2-8 South Street
Rydalmere NSW 2116

Fax: 1300 723 399
Customer Service Hotline
1300 786 411

  • Create PDF
  • Recommend
  • Feedback

This website uses cookies, by continuing to browse, you agree to our cookie policy. Read our privacy policy for more information.