Sensor/actuator terminal block - DOKD 1,5-TG - 3011054

Sensor/actuator terminal block, Connection method: Screw connection, Cross section:  0.2 mm² - 4 mm², AWG: 24 - 12, Width: 6.2 mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15

Price:

Overview

Technical data

Accessories

Approvals

Downloads

Your advantages

  • Same shape as DIK ... three-level initiator terminal blocks
  • The forks of the insertion bridge can be easily loosened for bridging between non-adjacent terminal blocks
  • Terminal blocks with red and green LEDs are available for optical signaling of the initiator and actuator wiring
  • Unlike the DIK terminal blocks, the lower level of these output terminal blocks makes direct contact with the DIN rail and as a PE connection are marked yellow-green
  • The upper level contains the feed-through connections for the signal cable which can be labeled
  • Alternate wiring of an actuator followed by an initiator is easy
  • Because the spine of the insertion bridge can be snapped into place with the terminal block housing, all the terminal points can be wired freely and the bridge can be securely positioned
  • The middle level supplies the connected actuators with power

Key Commercial Data

Orderkey 3011054
Packing unit 50 pc
Catalog page Page 387 (C-3-2015)
GTIN 4017918091910
Weight per Piece (excluding packing) 18.530 g
Custom tariff number 85369010

PHOENIX CONTACT Middle East FZ LLC

Office 301, Third Floor, Block 10
Dubai International Academic City (DIAC)
P.O. Box 345002
Dubai, United Arab Emirates
+971 4 4370324
  • Create PDF
  • Recommend
  • Feedback