Limit value switches - MINI MCR-SL-UI-REL - 2864480

MCR limit value switch, with adjustable hysteresis and delay time, with screw connection

Price:

Overview

Technical data

Accessories

Approvals

Downloads

Product Description

The 6.2 mm wide configurable 3-way threshold value switch MINI MCR-SL-UI-REL... is used to control and monitor analog standard signals.
On the input side, the analog standards signals 0...20 mA or 0...10 V per DIP switch can be set. On the output side, a relay with PDT contact is available. The switching thresholds are set via potentiometer.
The DIP switches located on the side of the housing have the following functions:
- Configuration of the switching hysteresis,
- Configuration of the operating and closed circuit current behavior,
- Setting of relay pickup times
- Setting of dropout delay
The relay status is indicated by a yellow LED on the front of the housing.
Power (19.2 V DC to 30 V DC) can be supplied through connection terminal blocks on the modules or in conjunction with the DIN rail connector.

Your advantages

  • Power supply possible via the foot element (TBUS)
  • Highly-compact threshold value switch for switching analog limit values
  • Status and error indication via two diagnostic LEDs
  • Operating current/closed circuit current switch-over
  • PDT relay at output
  • Limit value can be freely adjusted via potentiometer on the front
  • Input signal, hysteresis, and delay time can be configured via DIP switches
  • 3-way isolation
Logo Logo Logo

Key Commercial Data

Orderkey 2864480
Packing unit 1 pc
Catalog page Page 113 (C-7-2015)
GTIN 4017918974879
Weight per Piece (excluding packing) 70.900 g
Custom tariff number 85437090

PHOENIX CONTACT Middle East FZ LLC

Office 301, Third Floor, Block 10
Dubai International Academic City (DIAC)
P.O. Box 345002
Dubai, United Arab Emirates
+971 4 4370324
  • Create PDF
  • Recommend
  • Feedback